B Size

RAM Single Socket Arm with Octagon Button SocketThe RAP-B-200-1U consists of a socket at one end that accommodates 1" diameter balls: the other end houses octagon buttons. A tightening screw on the side of the arm enables the sockets to clamp firmly on...

RAM V-Base Rail Yoke Clamp Mount f/Beechcraft AirplanesPart #: RAM-B-108BUAccommodates rails from 1.0" to a maximum of 2.1" in diameter. To mount the RAM-B-108BU base, place the saddle shaped plate on the rail then wrap the metal clamp strap around the...

RAM EZY-Mount Quick Release Adapter KitEasy and convenient describe the RAM EZY-Mount line of products. Utilizing a quick-release male-to-female union, these mounts are perfect for those who want the most secure, yet rapid-release and portable kit...

RAM Double 1" Ball Adapter The RAM-B-230U, double ball joiner, consists of a 1" rubber ball on both ends that allow the connection of two 1" socket arms. When measured from ball center to ball center the arm length is 1.75". This mount is ideal if the...

RAM Ball Adapter with 3/8"-16 Threaded PostThe RAM-B-236-SEC1U consists of a 1" rubber ball connected to a 3/8"-16 threaded post. The thread length is 0.4".Specifications: Material: Powder Coated Marine Grade Aluminum Ball Size: B Size 1" Rubber...

RAM Ball Adapter for Apple MagSafeThis RAM MagSafe Adapter is designed specifically to fit the official Apple MagSafe Charger with the added benefit of RAM Mounts compatibility. This adapter allows a perfect and secure fit for the MagSafe's charging disk...

RAM Mount RAM-ROD 1" Ball f/RAM 5 Spot Mounting BaseBall Size: 1" Rubber BallColor: BlackMaterial: High Strength Composite The RAM Mount RAM-ROD 1-inch Ball is a durable and versatile mounting component designed by RAM Mounting Systems to enhance your...

Mount 1" Tough-Ball with M6-1X6mm Male Threaded PostRAM Mount's Tough-Ball. Why call it tough Because this latest addition to the RAM product line has steel inside and out. The seamless transition between RAM versatility and steel durability allows for a...

2" x 2.5" Diameter Base w/1" BallThe RAP-B-202U-225, high strength composite flat surface base, contains a 1" diameter rubber ball connected at right angles to a 2" x 2.5" rectangular base. This mount has pre-drilled holes at each corner of the base...

RAM 1" x 1" U-Channel Clamp with 1" Ball The RAM-B-259U is designed to mount to the lip edge of a flat surface up to 1" thick. Popular mounting edges include a car side window edge lip or glare shield on an airplance. The base has two composite bolts...

RAM Tough-Ball for Bronco Hood Tie-DownThe RAM Tough-Ball for Bronco Hood Tie Down (RAP-B-379U-252062-2SLW) is a 1" diameter rubber ball connected to a 1/4"-20 x.625" male threaded post, ideal for installing RAM Mounts on the Bronco Hood Tie Down.The...

1 Tough-Ball with M8-1.25 X 8mm Male Threaded PostConsists of a 1 diameter rubber ball, connected to a M8-1.25 X 8MM male threaded postMetric Thread Diameter and Pitch Option:M8-1.25 X 8MMMaterial:High Strength Composite SteelBall Size:1 Rubber Ball B...

RAM Ball Adapter with 1/4"-20 x 1/2" Threaded StudThe RAM-B-273-1U consists of a 1" rubber ball connected to a 1/4"-20 x 0.5 threaded post.Specifications: Hardware Included: (1) 1/4"-20 x 1" Set Screw Ball Size: B Size (1") Weight Capacity: Standard Use:...

RAM Tough-Ball with 1/4"-20 x .625" Threaded StudThe RAP-B-379U-252062 consists of a 1" diameter rubber ball, connected to a 1/4"-20 X .625" male threaded post. The male thread matches most standard camera and camcorder female threads found on the bottom...

RAM Short Double Socket Arm for 1" Ball BasesThe RAM-B-201U-A, short double socket arm, has a socket at both ends that accommodates 1" ball bases. RAM socket technology allows for almost infinite adjustment and perfect viewing angles. Dimensions: Overall...

Standard Double Socket Arm, Long Double Socket Arm & Double Ball Adapter for 1" BallsConsists of a STANDARD LENGTH double socket arm, LONG LENGTH double socket arm and double ball adapter that joins the two arms together. A single spring inside the...

Drill-Down Dashboard Ball Base with Backing Plate - B SizeMeet the new go-to mount and component option for pairing any holder or dock with a dashboard drill-down mount. This part consists of a 1" B-size rubber ball connected to a 2.5" diameter round...

RAM 14" PVC Pipe with Single Socket ArmsSpecifications: Product Dimensions: Overall Length 14" Ball/Socket Size: B Size (1") Materials: High strength composite The RAM Mounting Systems 14-inch PVC pipe with single socket arms offers a reliable mounting...

Low Profile Composite Double Socket ArmThe RAP-B-201U, composite standard double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket...

Composite Double Socket Swivel ArmThe RAP-B-200-12U, double socket swivel arm, consists of double 1" diameter open ball sockets with a 360 rotation point at the center of the arm. The rubber ball and socket at each end, and a central pivot point provides...

Double Socket Arm with Retention Knob for B Size 1" BallsThe RAM-B-201-ALA1-KRU, STANDARD length double socket arm with retention knob, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets,...

Tough-Ball with 1/4"-20 x .50" Threaded StudThe RAP-B-379U-252050 consists of a 1" diameter rubber ball, connected to a 1/4"-20 X .50" male threaded post. The male thread matches most standard camera and camcorder female threads found on the bottom of...

RAM Tough-Ball with 1/4"-20 x .375" Threaded Stud - B SizeThe RAP-B-379U-252037 consists of a 1" diameter rubber ball, connected to a 1/4"-20 X .375" male threaded post. The male thread matches most standard camera and camcorder female threads found on...

RAM Grab Handle M6 Bolt Replacement Kit with Ball BaseThe RAM Grab Handle Bolt Adapter Base is the ideal base for installing RAM Mounts on any vehicles grab handle that features an M6 threaded bolt. With a hollow center, you can feed the 6mm bolt or...

RAM Tough-Ball B Size with 3/8-16 x .375 Threaded StudThe RAM tough ball consists of a 1" diameter rubber ball that is connected to a 3/8"-16 x .375" male threaded post.Features: RAM Tough-Ball features a 3/8"-16 x .375" male threaded post for connection...

RAM M10 X 1.25 Pitch Male Thread with 1" BallThe RAM-B-349U includes a M10 x 1.25 pitch male thread connected to a 1" rubber ball. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects...

RAM 1/4"-20 Female Threaded Hole with 1" BallThe RAM-B-348U includes a 1/4"-20 female thread connected to a 1" rubber ball. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product...

Ram Pin-Lock Security Kit f/ 1" B Size Mounts and Gimbal BracketsYou make a significant investment in the equipment you purchase to make your job or hobby easier or more enjoyable. Whether it's a high end piece of marine electronics, a GPS for your...

RAM Motorcycle Brake/Clutch Reservoir Cover Base with 1" Ball OffsetThe RAM-B-346U base fits cleanly over your existing brake/clutch reservoir cover with the 1" ball offset. Made of die cast aluminum with an over molded rubber ball, both form and...

RAM Motorcycle Brake/Clutch Reservoir Cover Base with 1" Ball CenteredThe RAM-B-345U brake/clutch reservoir cover base fits cleanly over your existing reservoir cover with the 1" ball centered. Made of die cast aluminum with an over molded rubber ball,...

RAM Motorcycle Fork Stem Base with 1" BallThe RAM fork stem mount is one of the cleanest ways to mount small electronics on your motorcycle. Simply slide the assembly into the hole of the stem and tighten the machine screw to create a tight fit. This...

Mixed Combination Pin-Lock Security Knob and Key Knob for 1" Diameter B Size ArmsThe RAP-S-KNOB3U consists of a 1/4"-20 female threaded security knob and key knob. The RAP-S-KNOB3U replaces all knobs on 1" diameter B size arms and mounts. The...

RAM 1/4"-20 Female Threaded Hex Hole w/1" BallThe RAM-B-337U includes a 1/4"-20 female thread hex hole connected to a 1" rubber ball. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number...

RAM Motorcycle Combination Base for Handlebar or Brake/Clutch Reservoir with Two 1" BallsThe RAM combination handlebar and brake/clutch reservoir base provides the ultimate flexibility for mounting. Mount to either your handlebar or brake/clutch, almost...

RAM Chrome Motorcycle Brake/Clutch Reservoir Base w/1" BallThe RAM-B-309-1CHU connects to your handlebar clutch/brake clamp, left or right side, and holds one 1" diameter mounting ball. The chrome base fits the control clamps on your motorcycle with 40mm...

RAM Triple 1" Ball BaseMaterial: Powder Coated Marine Grade AluminumColor: Black Powder CoatBall Size: 1" Rubber Ball The RAM Mounting Systems RAM-B-289U Triple 1-Inch Ball Base is a durable and versatile mounting solution designed for reliable...

RAM M6 Threaded Female Hole with 1" BallMaterial: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. The RAM Mounting Systems RAM-B-273-M6U features a durable...

RAM Motorcycle Base w/9mm Hole & 1" BallThe RAM-B-272U consists of a 1" diameter ball and base with 9mm hole. This part is often used on motorcycles, attaching to the mirror frame, the main brand of bike for the RAM-B-272U is BMW. Material: Powder...

RAM 3" Max Width Square Rail Base with 1" Diameter BallMaterial:Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball Size Note:The "U" in the part number reflects product packaged in poly bag.

RAM 2.5" Max Width Square Rail Base w/1" Diameter BallMaterial:Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball Size Note:The "U" in the part number reflects product packaged in poly bag. The RAM Mounting Systems RAM-B-247U-25 is a durable...