Boat Outfitting

Starlink High Performance 10" Pedestal Mount with ADASTLKA Starlink Top PlateSeaview offers 5", 10", 16", 24" 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV.Pair your Seaview pedestal mount with the new...

KVH V30 Modular Top PlateSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible...

Starlink High Performance 5" Pedestal Mount with ADASTLKA Starlink Top PlateSeaview offers 5", 10", 16", 24" 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV.Pair your Seaview pedestal mount with the new...

Mast Mount f/KVH TV1Seaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.AdjustableDesigned with fore and aft adjustable...

Modular Top Plate for Kymeta U8 PeregrineKymetas industry-leading, easily mountable, electronically steered antennas provide satellite and cellular connectivity where and when you need it. Seaview has partnered with Kymeta to provide this top plate...

30 Tapered Closed Dome Aft Leaning Radar Mount with Camera/Searchlight Mount, Removable Spreaders and 10x10 Base PlateThe Seaview Tapered Masts are for most 18 to 24 closed dome radars or open array radars up to 4.5.DurabilityUnlike any other mount...

30 Tapered Closed Dome Aft Leaning Radar Mount with Removable Spreaders and 10x10 Base PlateThe Seaview Tapered Masts are for most 18 to 24 closed dome radars or open array radars up to 4.5.DurabilityUnlike any other mount available, Seaview takes the...

5" Thermal Camera Mount f/FLIR M100 M200 - 8" Round BaseGet the most out of your FLIR M100 or M200 camera with the Seaview PM5-FMH-8 camera mount. This mount will raise your camera 5.5" clearing anything that will obstruct your cameras view. The 8"...

Complete Spreader Kit for Radars Satdomes for Mounts Ending in M2 - BlackThis three-piece kit consists of a mid-section and two spreaders. Four bolts are used to secure each spreader to the midsection. The spreaders are tapered and angled aft so that...

Complete Spreader Kit for Radars Satdomes for Mounts Ending in M2This three-piece kit consists of a mid-section and two spreaders. Four bolts are used to secure each spreader to the midsection. The spreaders are tapered and angled aft so that whatever...

Top Plate for FLIR M100 M200This Seaview top plate is for FLIR M100 or M200 thermal cameras. This one piece design gives the top plate a nice clean look, and is made from King Starboard. The Seaview ADA-F2 top plate is specifically designed for FLIR...

Complete Spreader Kit for Radars Satdomes for Mounts Ending in M1 - BlackThis three-piece kit consists of a mid-section and two spreaders. Four bolts are used to secure each spreader to the midsection. The spreaders are tapered and angled aft so that...

5.5" Thermal Camera Mount Aft Leaning for M100 M200 SeriesGet the most out of your FLIR M100 and M200 Series Thermal Camera with Seaview's Aft-Leaning Camera Mount. Measuring 5.5" tall, the Seaview Aft-Leaning Camera Mount provides flexibility in any...

8' Radar Mast Pole Kit with 2 Strut KitsSeaview offers a 8' tall Pole Kit for just about any application. This Seaview Pole Kit is equipped with a adjustable base that has a small 5-1/4" x 3" footprint and a water tight Cable Seal, which can be easily...

Complete Spreader Kit for Radars Satdomes for Mounts Ending in M1This three-piece kit consists of a mid-section and two spreaders. Four bolts are used to secure each spreader to the midsection. The spreaders are tapered and angled aft so that whatever...

8' Pole KitSeaview offers a 8' tall Pole Kit for just about any application. This Seaview Pole Kit is equipped with a adjustable base that has a small 5-1/4" x 3" footprint and a water tight Cable Seal, which can be easily disassembled for pole removal...

Starlink Wedge Base C5 Certified Lighting Kit - WhiteThis Seaview wedge base kit caters to installations with restricted space, where additional height isnt required, yet an LED navigation light remains essential.This kit comes with all the Seaview...

Mast Mount for FLIR M300 Series Fits Mast with 2-5/8" or LargerAchieve an unobstructed view for your FLIR or Raymarine thermal camera by mounting it on your mast. Made from marine grade aluminum. We now Chem-Film (same process used by Boeing) each high...

PM5-FMD-8 Camera Mount for FLIR MD Series and Raymarine T200Get the most out of your thermalcamera or search light with a Seaview verticalmount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct your cameras view. The 8"...

1-1/4" Light Bar for Closed Dome Radar Stainless Steel - Must Get LTB TopSeaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars also available). These light...

8' Pole KitSeaview offers a 8' tall Pole Kit for just about any application. This Seaview Pole Kit is equipped with a adjustable base that has a small 5-1/4" x 3" footprint and a water tight Cable Seal, which can be easily disassembled for pole removal...

Triple Mount Adapter with C5 Certified LED Light 12 Post and Threaded 1-14 Thread Bases for GPS UnitsLight bar top with an LED light on a 12 post and 2 threaded 1-14 bases for GPS units. The Seaview PMU2ALED12C5 triple mount adapter is designed for...

APEX Surface Mount for Starlink Standard Gen 3 Antenna - BlackThe Seaview APEX APXG3DMV2 is a direct surface mount kit tailored for the Starlink Standard Gen 3 Antenna, specifically engineered for the demanding marine environment. Its suitability for...

Removable Base Kit for APXG3DMV2 Surface Mount for Starlink Standard Gen 3 AntennaThe optional removable base kit (APXG3DMRBV2) can be used to easily remove the Starlink Standard Gen3 antenna when needed. These are black anodized 3/8 thick aluminum...

C5 Certified Light Bar Top with LTBLED12C5 Masthead Light Threads for GPSUniversal light bar top for GPS or wind instrument with 12 light post and LED navigation light (LTBU1A + SVLTP12 + LTBLED12C5). The Seaview C5 Certified Light Bar Top with the...

Direct Mount 4 Wedge for Furuno DRS4DRadar Wedge for Furuno 24" radar domes; Geonav 24" radar domes; JRC 15" radar domes; Simrad DX64S; Sitex 24" T761 radar domes (RW4-6) by Seaview. Radar wedges are designed to be used directly between the radome and...

Compact Light Bar for Thermal Cameras, Low-Light Cameras, Search Lights (To Clear Closed Dome Radars) - No LightSeaview light bars are made from aluminum and powder-coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S...

Starlink Maritime Top Plate for Seaview M1 Style Modular MountsSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top...

0-12 Degree Wedge for Satellite MountsThe Seaview Low Profile Adapter Wedge will help you achieve the angle that you need to optimize your Low Profile Adapter or Seaview mount with 8" round base installation. By rotating the AMAW wedge halves you can...

Modular Plate to Fit Searchlights Thermal Cameras on Seaview Mounts Ending in M1 or M2 - BlackThe Seaview ADABLANKBLK is a universal modular top plate for mounting a searchlight or thermal camera for Seaview Modular Mounts ending in M1 or M2.King...

SM-18-ASeaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.AdjustableDesigned with fore and aft adjustable rails so that...

Gen 3 Standard Starlink Antenna Mount with 8 Degree Wedge Base - WhiteThe Seaview SRM200WB8 Mount for the Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) that has been specifically designed for the harsh marine environment. If its good for...

RW41 4 Degree Direct Mount Wedge for Furuno DRS4DL (15"-20" Radar) 18" Koden/SitexImprove your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar...

5" Black Modular Mount - Forward Raked - 7"x7" Base Plate - Top Plate RequiredThis Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point, thus...

5" Aft Leaning Mount with ADAR1 Top PlateThis Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point, thus making it a cost-effective choice...

PM5-FMT-8Get the most out of your thermalcamera or search light with a Seaview verticalmount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct your cameras view. The 8" diameter base takes up very little space making it...

5.63" Vertical Searchlight Mount for RCL95 - 8" Round BaseplateGet the most out of your thermal camera or searchlight with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct your camera's view...

PM-W6-7This 6 wedge goes between your Seaview mount and mounting surface. The base of the wedge is 7"x7" and is made from machined King Starboard . Utilize wedges to compensate for deck angle or planning attitude of the boat.Features Pre-drilled mounting...

5.63" Vertical Searchlight Mount for RCL85 - 8" Round BaseplateGet the most out of your thermal camera or searchlight with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct your camera's view...

Floodlight Kit for 1-1/4" Lightbars - Includes LED Light and HardwareFits all Seaview Modular Light Bars 1-1/4" in diameter.Includes 1-1/4" stainless steel clamp Mounting hardware Hella 0670 Sea Hawk LED Floodlight The Seaview PM-114LT-LED Floodlight...