Boat Outfitting

Spring-Lock Non-Locking Post - 13.5Hefty 1-3/4 diameter stainless steel posts. Use with non-locking Spring-Lock seat mount ot any non-locking Spring-Lock base (sold separately). The Springfield Marine Spring-Lock Non-Locking Post measures 13.5 inches in...

Spring-Lock Replacement Seat Mount BushingNon-locking Spring-Lock seat mount replacement bushing. Upgrade your boat's seating system with the Springfield Marine Spring-Lock Replacement Seat Mount Bushing. Designed specifically as a non-locking bushing,...

Spring-Lock Replacement Locking LatchSpring-Lock post base locking mechanism replacement latch. Upgrade your boat's security with the Springfield Marine Spring-Lock Replacement Locking Latch, designed for reliable performance and easy installation. This...

Spring-Lock Replacement End CapReplacement Spring-Lock end cap for securing the locking latch in the post. The Springfield Marine Spring-Lock Replacement End Cap (Part Number 2100012) is designed to securely hold the locking latch in place on your boat...

Spring-Lock Replacement Post BushingReplacement bushing for the top of the non-locking Spring-Lock post. The Springfield Marine Spring-Lock Replacement Post Bushing is designed to provide a secure fit at the top of the non-locking Spring-Lock post,...

Spring-Lock Power Pedestal Repair KitRepair kit for Spring-Lock Power-Rise pedestals. The Springfield Marine Spring-Lock Power Pedestal Repair Kit (Part 2100031) is designed to restore the functionality and stability of your Spring-Lock Power-Rise...

KingPin Taper-Lock AdapterInserts into Taper-Lock base to accept KingPin posts or mounts. The Springfield Marine KingPin Taper-Lock Adapter Part 2100032 is designed to provide a secure connection between Taper-Lock bases and KingPin posts or mounts...

Nylon KingPin BushingNylon replacement bushing for KingPin base (sold as each). The Springfield Marine Nylon KingPin Bushing Part 2100055 is designed as a durable replacement component for boat trailer kingpin bases. Crafted from high-quality nylon,...

Bolt-On Clevis PinReplacement tension clip between the extrusion and bolt-on T-brace. The Springfield Marine Bolt-On Clevis Pin (Part 2100073) is designed to provide a secure connection between the extrusion and bolt-on T-brace in marine and industrial...

Support Bushing KitReplacement bushing kit and V-bumper for pivot brackets on Guardian Deluxe and Standard heads to reduce abrasion on the lower unit. The Springfield Marine Support Bushing Kit Part 2100074 is a vital replacement component designed to...

Brass KingPin BushingBrass replacement bushing for KingPin base. The Springfield Marine Brass KingPin Bushing (Part #2100077) is a durable replacement component designed for precise fitment in marine and trailer kingpin assemblies. Crafted from...

SpringLock/Clip-Lock Base Socket Cover3/4 Deck Base Socket Cover fills the opening when not in use, creating a flush surface. (sold as pairs). The Springfield Marine SpringLock/Clip-Lock Base Socket Cover (Part 2100091) provides a seamless solution for...

KingPin Base Socket CoverPlastic KingPin cover keeps sockets clear when not in use. Use on KingPin 3/4 pin base. (sold as each). Protect your trailer's kingpin socket with the Springfield Marine KingPin Base Socket Cover, designed specifically for 3/4...

KingPin Unintentional Detach Retention Cup - PlasticReplacement standard post pin for use in KingPin standard base. The Springfield Marine KingPin Unintentional Detach Retention Cup in plastic offers a reliable replacement component designed for use...

5-Legged Deck Base Caster Replacement - 75mm with Brake Urethane5-pack caster replacements for a 5-legged deck base. Upgrade your boat's deck with the Springfield Marine 2100340 5-Legged Deck Base Caster Replacement. Designed for durability and...

Taper-Lock Seat Swivel BushingReplacement bushing for Taper-Lock Hi-Lo swivel. Washer included. The Springfield Marine Taper-Lock Seat Swivel Bushing (Part 2171003) is an essential replacement component designed for Taper-Lock Hi-Lo swivels. Constructed...

2-3/8 Trac-Lock III Swivel BushingReplacement bushing for 2-3/8 Trac-Lock III slides and swivels. Use on Trac-Lock III 2002 and newer. The Springfield Marine 2-3/8 inch Trac-Lock III Swivel Bushing (Part Number: 2171008) is designed to serve as a...

2 Taper-Lock Hi-Lo BushingReplacement bushing for the top of 2 Hi-Lo posts. For use on models 2020 and earlier. The Springfield Marine 2-Inch Taper-Lock Hi-Lo Bushing is a reliable replacement component designed specifically for the top of 2 Hi-Lo posts...

Universal Chair Mounting PlateAdapts a swivel mount to fit most seat mount patterns. High-strength aluminum. Use with any Springfield marine swivel. Adds structural support to rotational molded seats and other plastic seat bottoms. The Springfield...

Elite Slide Swivel - 48-1/4 x 13 seat mounting platform. Anodized slide and polish post mount fits over 4 pedestals, locks and tightens securely to prevent wobble. Large pivot area ensures stability. Rotates 360. Slide travels 5-3/8 fore and aft. Adds...

Workhorse Air-Ride Slide Swivel - 410-1/2 x 14-1/2 x 1/4 aluminum formed slide plate with anodized aluminum finish and heavy-duty stainless steel lock pin. Large, easy-to-reach control knobs. Swivels on post. Slide travels 6 fore and aft. Flip handle...

2-3/8 Locking Fixed-Height Post - 13Anodized to withstand all conditions. Heights are from the top of the post to the deck when the post is installed. Fits into any 2-3/8 Plug-In base (sold separately). Use with any 2-3/8 Trac-Lock swivel (sold...

2-3/8 Plug-In Hi-Lo Replacement BushingReplacement bushing for 2-3/8 Plug-In Hi-Lo seat mount. Helps to distribute the weight load across the top of the post. The Springfield Marine 3300766 2-3/8 inch Plug-In Hi-Lo Replacement Bushing is designed to...

KingPin Standard Square Steel Base with Brass - 7x7Standard square stainless steel base with satin finish. 3 below deck needed. Requires a 2-1/2 hole in the deck. The Springfield Marine KingPin Standard Square Steel Base with Brass offers a durable and...

KingPin Standard Square Steel Base with Satin E-Coat - 7x7Standard square mild steel base with satin finish. 3 below deck needed. Requires a 2-1/2 hole in the deck. The Springfield Marine KingPin Standard Square Steel Base with Satin E-Coat offers a...

2-3/8 Thread-Lock Fixed-Height Post - 13Sturdy 2-3/8 high-strength aluminum post for use while underway. Locking collar prevents unintentional removal from base. Use with Trac-Lock non-locking seat mount (sold separately). The Springfield Marine...

Thread-Lock Aluminum Surface Mount Base - 10High-strength aluminum surface mount base with anodized finish. Use with any Thread-Lock fixed-height post (sold separately). Can be used with Thread-Lock table and grill posts (sold separately). The...

RAM Single Arm Ball Mount HorizontalThe RAM single swing and socket arm mount includes a 6" STRAIGHT swing arm mounted on a horizontal surface mounting base. At the end of the mount is a rectangular 6.25" x 2" top base. The pivoting point of the...

Dock Edge Standard "D" PVC Profile 16ft Roll - WhiteThis versatile and strong profile without a lip can be mounted vertically or horizontally anywhere on the dock face. Great for pilings too. Made of Marine Grade PVC with UV Inhibitors and Fungicide...

RAM Mount w/3" x 11" Base & Short ArmsPart #: RAM-E-111U-DThe included plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your...

RAM 2.5" Round Base with the AMPs Hole Pattern, 1.5" Ball 200, 500c & 550c The RAM-202-G4U consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern...

RAM 2.5" Round Base with the AMPs Hole Pattern, 1" Ball 100, 150 & 300cThe RAM-B-202-G4U consists of a 1" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern...

RAM Trolling Motor Stabilizer MountThe RAP-400-202U consists of a double socket arm, 2.5" diameter round base that contains the universal AMPs hole pattern and Tough-Claw. The trolling motor stabilizer will take every bit of the vibration out of your...

RAM Trolling Motor Stabilizer MountThe RAM-108U consists of a double socket arm, 2.5" diameter round base that contains the universal AMPs hole pattern and single strap base. The strap will accommodate rails from 0.5" to 2" in diameter. The trolling...

RAM Trolling Motor Stabilizer Mount with Long Double Socket ArmThe RAM-108-DU consists of a double socket arm, 2.5" diameter round base that contains the universal AMPs hole pattern and single strap base. The strap will accommodate rails from 0.5" to 2"...

RAM 1" Diameter Ball Mount with 2/2.5" Round Bases & Mounting Hardware for Garmin Fishfinders & GPSMAP DevicesThe RAM-B-101-G2U consists of a double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into...

Ram Mount - Humminbird - Lowrance Elite/MarkThe RAM-107U Humminbird and Apelco Series RAM mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment point at the cradle bases. With a twist of the arm knob, you...

Ram Mount - Humminbird - Lowrance Elite/MarkThe RAM-B-107U, powder coated marine grade aluminum mount, consists of a double socket arm, one 2.5" diameter round base and connecting Humminbird/Lowrance marine base The mount is designed with a 1" diameter...

RAM 1.5" Diameter Ball Mount with 6.25" X 2" Rectangle Base, STANDARD LENGTH Double Socket Arm & 2.5" Round Base The RAM-111U, powder coated marine grade aluminum mount, consists of a double socket arm mount, one 2.5" diameter round base with 1.5"...

RAM 2.25" Diameter Ball Mount with 11" X 3" Rectangle Base, & 3.68" Round BaseThe RAM-D-111U-C consists of a short double socket arm, 3.68" diameter round base and 11" x 3" rectangular base. The round base contains pre-drilled holes, including two...