Jabsco 17820 Oil Changer System for Marine Engines and Transmissions

17820 Oil Changer System


The Jabsco Oil Change System is designed to be installed in a vessel's engine room with its manifold and valves permanently plumbed to the vessel's engines' oil pans or transmissions' oil sumps. The manifold is factory fitted with three ball valves to serve three different oil reservoirs and may be fitted with two additional ball valves to drain up to five oil reservoirs. The system can be used to remove old oil from an engine or transmission then reversed, with the integral reversing switch, to pump a measured amount of new oil back into the engine or transmission. Each connection to an engine is controlled by a dedicated full flow ball valve. The system's cover provides an attractive appearance, fully shrouding the entire pump and manifold system. It also provides added protection against accidental draining of an engine's oil supply because the valve cover protects the factory supplied valves from being accidentally bumped open. Additionally, at the end of an oil change, the cover will not close unless the factory supplied valves are in the fully closed position.

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

The Jabsco 17820 Oil Changer System is an efficient and reliable solution designed for installation in a vessel's engine room. Its manifold and valves are permanently plumbed to the engine's oil pans or transmission oil sumps, enabling quick and clean oil changes without the need for extensive disassembly. The system features a factory-fitted manifold with three ball valves that serve three separate oil reservoirs, with the option to add two more valves for up to five reservoirs. This flexibility allows for simultaneous or individual servicing of multiple engines or transmissions, making routine maintenance more streamlined. The integral reversing switch allows operators to remove old oil and then pump a measured amount of new oil back into the engine or transmission, ensuring precise oil volume control and reducing waste. Each connection is controlled by dedicated full flow ball valves, which provide secure and leak-free operation. The system's cover enhances its appearance and offers protection against accidental valve opening, safeguarding the engine oil supply during maintenance. The cover also prevents accidental draining by ensuring valves are fully closed before operation completion, adding an extra layer of safety during servicing. Built with durability in mind, the Jabsco 17820 Oil Changer System is an essential tool for marine maintenance, designed to improve efficiency and safety during oil change procedures. It comes with comprehensive instructions available online to facilitate proper installation and use, ensuring long-term performance and reliability in demanding marine environments.

Features:

• Permanently plumbed manifold with three ball valves, expandable to five reservoirs for versatile oil management

• Integral reversing switch for efficient removal and replacement of engine and transmission oil

• Full flow ball valves for secure, leak-free connections to each reservoir

• Protective cover that safeguards valves and enhances system safety and appearance

• Designed for marine engine room installation with durable construction suitable for demanding environments