Jabsco Impeller Kit 18777-0001-P with 10 Blades, Neoprene Material, 2-Inch Diameter

Impeller Kit

Material:Neoprene
Drive Type:Spline Drive
Number of Blades:10
Dimensions:
Diameter:2-1/4"
Shaft Width:5/8"
Shaft Diameter:2
Insert Material:Brass


Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.
Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.

Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.

Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Dont use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.

Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such.

Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

The Jabsco Impeller Kit 18777-0001-P is designed to ensure reliable performance in engine cooling, bilge, transfer, and general-purpose pumps. Crafted from durable neoprene, this impeller features ten blades that provide efficient fluid movement and long-lasting operation. Its spline drive enables compatibility with a variety of pump models, making it a versatile replacement part for maintaining your marine or industrial systems.

Each impeller has a diameter of approximately 2-1/4 inches, with a shaft width of 5/8 inch and a shaft diameter of 2 inches, ensuring a secure fit within compatible pumps. The insert material is brass, adding strength and corrosion resistance to the component. Manufactured under strict quality standards, Jabsco flexible impellers are tested for durability and efficiency, reducing the likelihood of unexpected failures and ensuring your system runs smoothly.

Replacing the impeller is a straightforward maintenance task that should be performed at least once annually or more frequently depending on engine duty. Proper installation involves removing the end cover screws and using a removal tool or channel lock pliers to grip the hub, avoiding damage to the pump face. Applying grease to the impeller prior to installation facilitates easier fitting and provides protection during initial priming. Always keep spare impellers onboard for emergencies, as they are critical to your system’s operation. Regular replacement and preventative maintenance help prevent overheating and system failures, extending the lifespan of your pump and engine.

Note that this product may contain chemicals such as lead, which are regulated by California law, and proper handling is recommended. For safety information, visit P65Warnings.ca.gov. Proper maintenance and timely replacement of the impeller are essential for optimal pump performance and system reliability, making the Jabsco Impeller Kit an essential component for marine and industrial applications.

Features:

• Material: Neoprene for durability and flexibility

• Drive Type: Spline drive for versatile compatibility

• Number of Blades: 10 blades for efficient fluid movement

• Diameter: Approximately 2-1/4 inches for a secure fit

• Shaft Width: 5/8 inch with a 2-inch shaft diameter

• Insert Material: Brass for corrosion resistance

• Easy to replace with removal tools or pliers

• Suitable for most bronze flexible impeller pumps

• Manufactured to high-quality standards for long-lasting performance

• Recommended to replace annually or as needed for optimal system operation