Jabsco Impeller Kit - 6 Blade Urethane, 2-Inch Diameter Part Number 6303-0007-P

Impeller Kit

Material:Urethane
Drive Type:Single Flat Drive
Number of Blades:6
Dimensions:

• 
  Diameter:2"
  
  


• 
  Shaft Width:7/8"
  
  


• 
  Shaft Diameter:5/16"

Insert Material:Plastic


Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.
Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.

Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.

Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Dont use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.

Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such.

Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

The Jabsco Impeller Kit, part number 6303-0007-P, features a durable urethane construction designed for reliable performance in engine cooling, bilge, transfer, and various general-purpose pumps. This impeller has a 6-blade configuration with a 2-inch diameter, suitable for pumps requiring a single flat drive and a 7/8-inch shaft width. The plastic insert enhances the durability and longevity of the impeller, making it an essential replacement part for marine and industrial applications. These flexible impellers are compatible with most makes and models of bronze flexible impeller pumps, ensuring broad versatility. Rigorous quality control processes guarantee efficient, long-lasting operation, supporting maintenance schedules that recommend replacing impellers at least once annually or more frequently based on engine workload. Proper installation involves removing the end cover screws and using a Jabsco Impeller Removal Tool or channel lock pliers to grip the hub, avoiding damage to the pump face. Regular replacement and inspection of impellers help prevent engine overheating and maintain optimal performance. It is advisable to carry spare impellers onboard for emergencies, as they are vital components of the cooling system. Applying grease to the new impeller facilitates installation and provides initial protection during priming, ensuring the pump functions properly after assembly. This product complies with safety standards, but users should be aware that it may contain chemicals such as lead, which are known to cause health hazards under California's Proposition 65. Proper handling and disposal are recommended to ensure safety and environmental compliance.

Features:

• Material: Urethane for durability and flexible performance

• Drive Type: Single flat drive for compatibility with various pumps

• Number of Blades: 6 blades for efficient fluid movement

• Dimensional Compatibility: 2-inch diameter with 7/8-inch shaft width and 5/16-inch shaft diameter

• Insert Material: Plastic for enhanced longevity and ease of installation