Paddlesports

36" Baja Paddle Leash - BlackNever lose a paddle while paddling with the YakGear Baja Paddle Leash. The Baja Paddle Leash is composed of a base of flexible 1/4-inch nylon bungee that is overwrapped by a nylon sleeve for strength. Unlike many sleeve...

Universal Drain Plug KitAdd or replace the drain plugs on any kayak with the YakGear Universal Drain Plug Kit. This kit provides the two most used kayak and paddleboat drain plugs with a wide thread (red washer) and a fine thread (black washer) to...

Jaw Jaw Swivel - Investment Cast 316 Stainless Steel Body with 304 Stainless Steel PinJaw Jaw Swivels link together two parts that have separate rotational directions, reducing knotting or twisting and relieving stress. Constructed of...

Motor Well Boot - Molded Rubber - 5-1/2Motor Well Boot organizes and protects engine control cables, wires, or fuel lines. Black accordion-style seal. Includes mounting ring. Constructed of UV-stabilized molded rubber. Installs with #8 RH fasteners (not...

Replacement Wall Catch - Chrome nbsp;This wall catch is intended to be a replacement part for Sea-Dog's Door Stop and Catch.Features:Chrome plate finishWARNING: This product can expose you to chemicals which are known to the State of California to cause...

Heavy-Duty Swivel Hasp - 3 - Cast 304/316 Stainless SteelThese Heavy Duty Swivel Hasp is designed with a slotted plate that fits over a swivel pad eye. The swivel eye rotates, acting as a temporary lock, but will also accept most padlocks for more...

Heavy-Duty Thimble - Stamped 304 Stainless SteelThese Heavy Duty Thimbles are used to protect wire or rope from contact with the load it is hoisting. The thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Ideal for lines...

Door Button - Chrome Plated BrassThese Door Buttons are a sleek, simple, and effective hardware solution to keep doors closed. Spring-loaded design keeps the door in place. Constructed of cast brass with a plain polished or chrome-plated finish. Surface...

Low Profile Cowl Vent/Snap-On Deck Plate - Dip Molded PVCLow Profile Cowl Vents are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Ideal for applications...

Splicing Fid - Stainless Steel with Hardwood HandleThis Splicing Fids time-tested design makes it the ideal tool for expert rope splicing. Features a hardwood handle for ease of operation and a precision tip for better splices, neater braids, and...

Bow Shackle - Investment Cast 316 Stainless Steel BodyWith their rounded shape, Bow Shackles are designed for many different applications. Features a screw pin closure for quick removal, making them ideal for rigging applications where fast and/or...

Door Stop Catch - Investment Cast 316 Stainless SteelThese Door Stops and Catches hold the door securely against the rubber stop, effectively reducing rattling common with most door hooks. The spring-loaded latch allows for quick and easy release...

Bow Eye - 3/8 - Machined 304 Stainless SteelThese Bow Eyes are for use as a tie-down point on your boats bow. The 3/8 shafts have rolled threads. Constructed of corrosion-resistant machined 304 stainless steel. Includes adjustable finish nuts, which...

Manual Windshield Wiper - Machined Brass Chrome PlatedManual Windshield Wiper includes an 8-12 adjustable wiper arm (410051) and 11 blade (411151). This hand-operated wiper is an economical alternative to traditional wiper motors. Constructed of chrome...

Stainless Steel Deck Step 3-1/4" x 8-3/8"Injection Molded Rubber/Stamped 304 Stainless SteelThese Deck Steps are lined with injection molded rubber to facilitate traction. Constructed of corrosion resistant stamped 304 stainless steel.WARNING: This...

Stainless Steel Deck Step 2-1/4" x 8-3/8"Injection Molded Rubber/Stamped 304 Stainless SteelThese Deck Steps are lined with injection molded rubber to facilitate traction. Constructed of corrosion resistant stamped 304 stainless steel.WARNING: This...

Sand Cast Brass Chrome Plated Folding StepThis Folding Step has a patterned, texture finish for better traction. The spring loaded folding mechanism will keep the step in the open or closed position without rattling. Constructed of chrome plated sand...

Folding Step - Formed 304 Stainless SteelThe ultimate step at a very competitive price! This Folding Step can be locked in a rattle-free, upright position when not in use. The unique design features a sawtooth, edged step to provide secure footing when...

Stainless Steel Release Pin 1/4 x 1-1/2Standard-duty detent release pins are ideal for basic holding and removal applications that dont require a positive locking ball feature. These quick-release pins are activated by a push or pull motion. The detent...

Stainless Steel Flush Mount Rod Holder - 30Flush Mount Rod Holders are constructed of corrosion resistant investment cast 316 stainless steel. Features a 30 angle. Accommodates rods up to 1-1/2. Installs with three #12 FH fasteners (not included)...

Stainless Cast Steel Flush Mount Rod Holder with Cap - 30The unique design of the cast stainless mounting flange allows the use of a gasket to reduce leakage that is common on other cast rod holders. This Flush Mount Rod Holder with Cap is constructed of...

Stainless Steel Flush Mount Rod Holder with Cap - 90A high quality, vertical mount rod holder! These 90 Flush Mount Rod Holders are constructed of investment cast 316 stainless steel with a plastic liner, integral cap, and mounting gasket. Features a 90...

Stainless Steel Side Mount Removable Rod HolderSide Mount Rod Holder slides in and out of mounting plate for a lower profile while not in use. Constructed of formed 316 stainless steel with mounting plate. Features a 30 angle. Accommodates rods up to...

Stainless Steel Flush Mount Rod Holder with Cap - 30Flush Mount Rod Holder with Cap is constructed of corrosion resistant formed 316 stainless steel with a UV resistant PVC cap and full length PE liner. Features a 30 angle. Accommodates rods up to 1-1/2...

Stainless Steel 90 Flush Mount Rod HolderA value priced, vertical mount rod holder! This Economy 90 Flush Mount Rod Holder with Cap is constructed of formed 304 stainless steel with a plastic liner, mounting gasket, and integral cap. Features a 90 angle...

Flush Mount Rod Holder with Stainless TopThe look you want at an economical price! This Flush Mount Rod Holder with Stainless Top is constructed of UV resistant injection molded ABS with a stainless steel top cap. Features a 30 angle. Accommodates rods...

Flush Mount Rod Holder - WhiteFlush Mount Rod Holders are constructed of injection molded ABS. Features a 30 angle. Accommodates rods up to 1-5/8. Installs with three #12 FH fasteners (not included).WARNING: This product can expose you to chemicals which...

Flush Mount Rod Holder - BlackFlush Mount Rod Holders are constructed of injection molded ABS. Features a 30 angle. Accommodates rods up to 1-5/8. Installs with three #12 FH fasteners (not included). WARNING: This product can expose you to chemicals...

Stainless Steel Side Mount Rod HolderSide Mount Rod Holders and mounting brackets are constructed of formed 316 stainless steel with plastic end cap. Accommodates rods up to 1-5/8 in diameter. Installs with four #8 RH fasteners (not included).WARNING:...

Side Mount Rod Holder - 9" - WhiteSide Mount Rod Holders are constructed of injection molded polypropylene with 304 stainless steel mounting brackets. Accommodates rods up to 1-3/4 in diameter. Installs with four #8 RH fasteners (not included).WARNING:...

Side Mount Rod Holder - 9" - BlackSide Mount Rod Holders are constructed of injection molded polypropylene with 304 stainless steel mounting brackets. Accommodates rods up to 1-3/4 in diameter. Installs with four #8 RH fasteners (not included).WARNING:...

Side Mount Rod Holder - GreyConstructed of injection molded polypropylene. These Side Mount Rod Holders have an integral, molded-in standoff located on the back of the rod holder, allowing direct mounting to any flat surface. Accommodates rods up to...

Side Mount Rod Holder - WhiteConstructed of injection molded polypropylene. These Side Mount Rod Holders have an integral, molded-in standoff located on the back of the rod holder, allowing direct mounting to any flat surface. Accommodates rods up to...

Side Mount Rod Holder - BlackConstructed of injection molded polypropylene. These Side Mount Rod Holders have an integral, molded-in standoff located on the back of the rod holder, allowing direct mounting to any flat surface. Accommodates rods up to...

Narrow Gunnel Flush Mount Rod Holder - WhiteThese Narrow Gunnel Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30 angle and designed for narrow gunnel applications while accommodating rods up to 1-5/8. Installs with three #10...

Narrow Gunnel Flush Mount Rod Holder - BlackThese Narrow Gunnel Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30 angle and designed for narrow gunnel applications while accommodating rods up to 1-5/8. Installs with three #10...

Triple Threat Three Pole Rod Holder - Flat Dark EarthThe Triple Threat Three Pole Rod Holder is made in the USA with recycled materials. Features the ability to hold bait, cast, and fly-fishing rods/reels. This three-pole, side-mount rod holders come...

Triple Threat Three Pole Rod Holder - BlackThe Triple Threat Three Pole Rod Holder is made in the USA with recycled materials. Features the ability to hold bait, cast, and fly-fishing rods/reels. This three-pole, side-mount rod holders come equipped with...

Triple Threat Three Pole Rod Holder - WhiteThe Triple Threat Three Pole Rod Holder is made in the USA with recycled materials. Features the ability to hold bait, cast, and fly-fishing rods/reels. This three-pole, side-mount rod holders come equipped with...

Side Mount Rod Holder - Flat Dark EarthThis flush-mount rod holder can accommodate rods up to 1-5/8" in diameter. Features a 30 angle. Constructed of UV-resistant injection-molded ABS. Installs with three 1/4" FH fasteners (not included)...