Description
Lithium Battery SuperPack 12V/200Ah NG
The Lithium SuperPack NG batteries are Lithium Iron Phosphate (LiFePO4 or LFP) batteries available in various capacities with nominal voltages of 12,8V, 25,6V, and 51,2V. They are designed as drop-in replacements for lead-acid batteries in mobile, marine, and industrial applications. Designed for extended off -grid use, it provides ample capacity to power the complete electrical system, including high -demand appliances. Its form factor and terminal layout ensure easy installation across a wide range of mobile and industrial applications, including commercial and recreational vehicles.
The Lithium SuperPack batteries are extremely easy to install, not needing any additional components. The internal switch will disconnect the battery in case of over-discharge or high temperature.
The Lithium SuperPack batteries can be connected in parallel. A series connection is not allowed.
Embedded protection:The integrated Battery Management System (BMS) provides a layer of protection that ensures energy flow remains within the safe operating limits of the battery and the overall system.
Energy flow management:Capable of interrupting charging and discharging independently through its self-resetting circuit breaker.
Continuous current capability: Supports continuous discharge currents up to 2C and continuous charge currents up to 1C, reducing the need to oversize the battery pack.
Internal cell balancing: Allows the battery to maintain optimal voltage balance at the end of the charging process.
Bluetooth monitoring and control: Integrated Bluetooth interface for real-time monitoring and control of the battery via VictronConnect.
On/Off push button: Push button for switching the battery on or off, disabling both charging and discharging. The on/off procedure can also be used to reset certain protection or lock-in conditions. When switched off, the battery enters a storage mode with a self-discharge rate of less than 3% per month.
LED status indication: Two integrated LEDs indicate Bluetooth connectivity, warning and alarm conditions, and firmware update status.
External Feedback Signal (EFS): Provides a battery voltage signal limited to 250 mA. The EFS signal serves as an External Disconnection Signal (EDS) to trigger an event for redundant system protection. Additionally, the EFS can be configured as an External Charging Signal (ECS), based on the low SoC pre-alarm threshold, to activate a charger start signal.
Self -heating function: Maintains the battery temperature above the minimum safe charging limit to ensure reliable operation in cold environments. Two heating modes are available:
- Charger mode the heater is powered by the connected charger and activates automatically when the cell temperature drops below 0 C during charging (default setting).
- Auto mode the battery powers the heater to keep the cells above 0 C for immediate charging. This is limited by the batterys internal energy; if SoC falls below the Low SoC threshold, the heater is disconnected, and charging remains unavailable.
The internal heat balancer supports optimised thermal management and a wide operating range.
Parallel connection: Supports parallel connection of an unlimited number of batteries to increase total energy capacity. The total system current should not exceed the maximum current that a single battery can safely interrupt (refer to Battery Specification [28] for details.
BCI Group 49 compatibility: Height dimension is compatible with the BCI Group 49 standard, allowing easy replacement in standard battery compartments.
Mounting brackets:Mounting brackets are included to ensure safe and stable fixing in all three axes.
Ingress protection (IP65): The battery enclosure is rated IP65, providing protection against dust ingress and low-pressure water jets from any direction.
Self-restoring protection: Certain protection events are automatically cleared without user intervention. The battery allows multiple automatic recovery attempts for short-circuit and over-current conditions, reducing the need for manual reset in the case of occasional or transient faults.
Please contact your dealer for any returns, repairs or support issues related to this product.The Victron Energy Lithium Battery SuperPack 12V/200Ah NG is a high-capacity Lithium Iron Phosphate (LiFePO4) battery designed for demanding mobile, marine, and industrial use. Featuring a nominal voltage of 12.8V, this battery offers reliable power for high-demand appliances and systems, making it an ideal drop-in replacement for traditional lead-acid batteries. Its compact form factor and terminal layout facilitate straightforward installation in various applications, including RVs, boats, and off-grid power setups. The SuperPack NG is engineered for extended off-grid operation, delivering ample capacity to support entire electrical systems and ensuring long-term, maintenance-free performance. The internal design requires no additional components for installation, simplifying setup and reducing installation time. An integrated switch disconnects the battery during over-discharge or high-temperature conditions, enhancing safety and longevity. This battery supports parallel connection for increased capacity but prohibits series connections to maintain system safety and integrity. The embedded Battery Management System (BMS) provides comprehensive protection, regulating energy flow within safe limits and preventing overcharge, over-discharge, and thermal issues. Additionally, the self-resetting circuit breaker can independently interrupt charging and discharging, offering robust energy flow management. The battery supports continuous discharge currents up to 2C and charge currents up to 1C, minimizing the need for oversized packs and optimizing system efficiency. Internal cell balancing ensures voltage consistency across cells, maintaining overall performance and extending battery life. Bluetooth connectivity enables real-time monitoring and control via VictronConnect, providing users with convenient access to battery status, warnings, and firmware updates. An on/off push button allows manual control of the battery's operational state, including resetting protection modes and entering storage mode, which reduces self-discharge to less than 3% per month. Two LEDs indicate Bluetooth connectivity, operational status, and potential alarms, facilitating quick diagnostics. The External Feedback Signal (EFS) offers a voltage signal limited to 250 mA, serving as an external disconnection or charging trigger based on system needs. The self-heating function maintains optimal operating temperatures in cold environments, with automatic modes activated during charging or when maintaining temperature above 0°C, even in low SoC conditions. Designed to support unlimited parallel connections, the SuperPack NG can scale to meet increasing energy demands while maintaining safety standards, supported by its compatibility with BCI Group 49 battery compartments and included mounting brackets for secure installation. Its IP65-rated enclosure provides excellent protection against dust and water ingress, suitable for harsh environments. The battery features self-restoring protections for transient faults, reducing maintenance and downtime. Overall, the Victron Energy Lithium Battery SuperPack 12V/200Ah NG delivers dependable, scalable, and maintenance-free energy solutions for demanding mobile and off-grid applications.
Features:
- High-capacity 12V/200Ah Lithium Iron Phosphate (LiFePO4) design for demanding applications
- Drop-in replacement for lead-acid batteries with easy installation and terminal compatibility
- Integrated Battery Management System (BMS) providing comprehensive safety and protection
- Supports parallel connection for scalable energy capacity; series connection not permitted
- Bluetooth interface enabling real-time monitoring and control via VictronConnect app
- Push button for manual switching on/off and protection reset
- LED indicators for Bluetooth status, warnings, alarms, and firmware updates
- External Feedback Signal (EFS) for external disconnection or charging control
- Self-heating function maintaining optimal operating temperature in cold environments
- Supports unlimited parallel connections within system safety limits
- Compatible with BCI Group 49 standard for easy replacement
- IP65 rated enclosure offering dust and water resistance
- Self-restoring protections for transient faults reducing maintenance needs
Details
truck_freight: |
Yes |
oversized: |
No |
