Description
Orion-Tr Smart DC-DC Charger Isolated 48/12 20A (240W)
The Orion-Tr Smart DC-DC charger is an adaptive 3-stage charger (bulk absorption float) designed for dual-battery systems, such as in vehicles or on boats, where the starter battery (hence the alternator) is used to charge the service battery. The name Smart originates from its built-in Bluetooth connection, which allows the charger to be monitored and configured remotely via Bluetooth. It also features a remote on/off switch and an engine running detection mechanism. This isolated model allows the input and output to have separate chassis grounds.
The Orion-Tr Smart charger can be used in 12V, 24V, or 48V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W, and unlimited multiple units can be connected in parallel to increase output power.
Suitable for high temperatures up to 55C with a full rated output up to 40C.
Features:
- Remote on/off terminal - The remote on/off terminal eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low-power switch, or, for example, the engine run/stop switch.
- All models are short-circuit proof and can be paralleled to increase output current. An unlimited number of units can be connected in parallel.
- High temperature protected - The output current will reduce at high ambient temperature.
- IP43 protection - When installed with the screw terminals oriented downwards.
- Screw terminals - No special tools are needed for installation.
- Input fuse (not replaceable) - On 12 V and 24 V input models only.
- Adjustable output voltage - Not intended for battery charging. Please consider using an Orion-Tr Smart for battery charging.
The Victron Energy Orion-Tr Smart DC-DC Charger is an advanced, adaptive three-stage charger designed for dual-battery systems in vehicles and boats where the starter and service batteries are charged via the alternator. Featuring a built-in Bluetooth interface, this model allows users to monitor and configure charging parameters remotely through a smartphone or compatible device, providing convenience and precise control. Its remote on/off terminal simplifies installation by eliminating the need for high-current switching, making it easier to integrate with existing systems. The engine running detection mechanism ensures optimal charging behavior, activating only when the engine is running. This isolated model supports input and output with separate chassis grounds, enhancing safety and compatibility in complex electrical setups. Suitable for 12V, 24V, or 48V systems, it is compatible with both lead-acid and lithium batteries, offering versatility for various energy storage needs. Multiple units can be connected in parallel to scale output power, making it suitable for larger systems or higher power requirements. The charger is built to operate reliably in high-temperature environments, with a full rated output up to 40°C and protection up to 55°C. Its IP43 rating ensures protection against dust and water ingress when installed with screw terminals facing downward. Featuring screw terminals for easy installation without special tools and an input fuse (not replaceable) on 12V and 24V models, the Orion-Tr Smart is a robust and flexible solution for complex battery management. Please note that it is not intended for direct battery charging; for that application, Victron offers dedicated battery chargers in the Orion-Tr Smart series. This model's short-circuit proof design and paralleled connection capability enable scalable power solutions, accommodating a wide range of system sizes and configurations. For comprehensive installation and operation guidance, refer to the owner’s manual available online.
Features:
- Remote on/off terminal allows for easy control via low-current switch or engine run/stop control
- Short-circuit proof design supports parallel connection of unlimited units to increase output current
- High-temperature protection reduces output current when ambient temperature exceeds rated levels
- IP43 rated enclosure offers dust and water resistance when installed with screw terminals downward
- Screw terminals facilitate quick and tool-free installation
- Input fuse on 12V and 24V models provides overcurrent protection (fuse not replaceable)
- Adjustable output voltage enables fine-tuning for specific system requirements
Details
truck_freight: |
No |
oversized: |
No |
owners_manual_url: |
https://productimageserver.com/literature/ownersManual/109720OM.pdf |
