Victron Energy Phoenix Inverter 12/800 with VE.Direct GFCI Duplex Outlet – 650W, 120V

Phoenix Inverter 12/800 - 120V - VE.Direct GFCI Duplex Outlet - 650W

Inverters allow users to power domestic equipment - requiring 230V/120V AC - using 'leisure' or 'automotive' batteries rated at 12V, 24V or 48V DC.

*This inverter has a GFCI Duplex Outlet.

E.Direct Communication Port

The VE.Direct port can be connected to:

• A computer (VE.Direct to USB interface cable needed)


• Apple and Android smartphones, tablets, MacBook, and other devices


• (VE.Direct Bluetooth Smart dongle needed)

Fully Configurable:

• Low battery voltage alarm trip and reset levels


• Low battery voltage cut-off and restart levels


• Dynamic cut-off: load-dependent cut-off level


• Output voltage 210 - 245V


• Frequency 50 Hz or 60 Hz


• ECO mode on/off and ECO mode sense level

Monitoring:

• In- and output voltage, % load, and alarms

Proven Reliability

The full bridge plus toroidal transformer topology has proven its reliability over many years.

The inverters are short-circuit proof and protected against overheating, whether due to overload or high ambient temperature.

High Start-Up Power

Needed to start loads such as power converters for LED lamps, halogen lamps, or electric tools.

ECO Mode

When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once on standby, the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.

Remote On/Off

A remote on/off switch can be connected to a two-pole connector, or between battery plus and the left-hand contact of the two-pole connector.

LED Diagnosis

Please see the manual for a description.

To Transfer the Load to Another AC Source: The Automatic Transfer Switch

For Victrons low-power inverters, they recommend the Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption.

Inverter Specifications:

• Cont. Power at 25 degrees C: (1) 800VA


• Cont. Power at 25 degrees C / 40 degrees C: 650 / 560W


• Peak Power: 1500W


• Output AC Voltage / Frequency (adjustable): 230VAC or 120VAC +/- 3% 50Hz or 60Hz +/- 0,1%


• Input Voltage Range: 9,2 - 17 / 18,4 - 34,0 / 36,8 - 62,0V


• DC Low Shut Down (adjustable): 9,3 / 18,6 / 37,2V


• Dynamic (load dependent) DC Low Shut Down (fully configurable): Dynamic cut-off, see https://www.victronenergy.com/live/ve.direct:phoenix-inverters-dynamic-cutoff


• DC Low Restart Alarm (adjustable): 10,9 / 21,8 / 43,6V


• Battery Charged Detect (adjustable): 14,0 / 28,0 / 56,0V


• Max. Efficiency: 90 / 90 / 91%


• Zero-Load Power: 6,5 / 7 / 9,5W


• Default Zero-Load Power in ECO Mode (default retry interval: 1 / 1,5 / 3,0W


• ECO Mode Stop Start Power Setting: Adjustable


• Protection (2): a - f


• Operating Temperature Range -40 to +65 degrees C (fan-assisted cooling)

Enclosure Specifications:

• Material Color: Steel chassis and plastic cover (blue Ral 5012)


• Battery-Connection: Screw terminals


• Maximum Cable Cross-Section: 25 / 10 / 10mm / AWG4 / 8 / 8


• Standard AC Outlets: 230V: Schuko (CEE 7/4), IEC-320 (male plug included); UK (BS 1363), AU/NZ (AS/NZS 3112); 120V: Nema 5-15R, GFCI


• Protection Category: IP 21


• Weight: 5,5kg / 12lbs


• Dimensions (H x W x D, mm): 105 x 230 x 325

Accessories:

• Remote On-off: Yes


• Automatic Transfer Switch: Filax

Standards:

• Safety: EN-IEC 60335-1 / EN-IEC 62109-1 / UL 458 (3)


• EMC: EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3


• Automotive Directive ECE R10-4: 1) Nonlinear load, crest factor 3:1; 2) Protection key: a) output short circuit b) overload c) battery voltage too high d) battery voltage too low e) temperature too high f) DC ripple too high

The Victron Energy Phoenix Inverter 12/800 (Part Number: PIN121800510) provides reliable power conversion from 12V DC to 120V AC, making it ideal for off-grid applications, mobile setups, and backup power systems. This inverter features a full bridge and toroidal transformer topology, ensuring proven durability and efficiency for demanding environments. With a continuous power output of 650W and peak power capacity of 1500W, it can handle a variety of household and recreational devices, including LED lamps, electric tools, and small appliances, even during startup surges. Its robust construction is protected against overloads, overheating, and short circuits, thanks to its advanced protection features and fan-assisted cooling system, suitable for operating temperatures from -40°C to +65°C.

The inverter includes a GFCI duplex outlet, ensuring safety during use, especially in wet or outdoor environments. The integrated VE.Direct communication port allows users to connect the inverter to computers, smartphones, and tablets via USB or Bluetooth Smart dongle, facilitating real-time monitoring and configuration. Fully customizable settings include low battery voltage alarms, load-dependent dynamic cut-off, adjustable output voltage and frequency, and ECO mode activation for energy savings during low load conditions. When ECO mode is enabled, the inverter automatically switches to standby below a 15W load, restarting periodically to check for load presence, thereby reducing idle power consumption.

Additional features include remote on/off capability, LED diagnostics for quick troubleshooting, and compatibility with the Filax Automatic Transfer Switch for seamless load transfer between AC sources. The inverter's enclosure is constructed with a steel chassis and a blue plastic cover, equipped with screw terminals for battery connection and multiple standard AC outlets, including Schuko, IEC-320, Nema 5-15R, and UK BS 1363, ensuring versatility across regions. Its compact design and lightweight construction (around 12 lbs) make it suitable for portable applications. Compliant with safety standards such as EN-IEC 60335-1, UL 458, and EMC regulations, the Phoenix 12/800 is a reliable and versatile power solution for both professional and recreational use.

For detailed installation, operation, and configuration instructions, please refer to the owner’s manual available online. Whether used for off-grid solar systems, mobile homes, or backup power, this inverter offers high efficiency, extensive monitoring options, and robust protection features to ensure continuous and safe operation in various environments.

Features:

• 650W continuous power output with 1500W peak power capability

• VE.Direct communication port for monitoring and configuration via USB or Bluetooth Smart

• GFCI duplex outlet for enhanced safety in wet environments

• Fully configurable low battery alarms, load-dependent cut-off, and output voltage/frequency

• ECO mode with automatic standby to save energy during low load conditions

• Remote on/off control for convenient operation

• Proven reliability with short-circuit, overload, and overheating protection

• Fan-assisted cooling suitable for operating temperatures from -40°C to +65°C

• Multiple standard AC outlets for regional compatibility

• Compact, lightweight design with steel chassis and IP21 protection rating