Marine Navigation & Instruments

NMEA Starter Kit Network starter kit. Includes 2 terminating resistors (TR-120M-RD, TR-120F-RD), two T-connectors (N2K-T-RD), one 2 ft extension cable (N2KEXT-2RD), and one 15 ft extension cable (N2KEXT-15RD), and a power node (N2K-PWR-RD). For use with...

6' Extension cable fits all 2007 and newer Ethernet-enabled Lowrance units with 5-pin yellow connector The Lowrance 6 ft Ethernet Extension Cable ETHEXT-6YL is designed to enhance connectivity for all 2007 and newer Lowrance fish finders and marine...

Shoot-thru-hull mount, 20 degree pod type with remote temperature (200 kHz). Includes power cable (20 ft. cable). Enhance your marine setup with the Lowrance PDRT-WSU transducer, designed for optimal performance with your boat's sonar system. This...

Extension Cable For LSS-1 or LSS-2 TransducerFor use specifically with Lowrance's LSS-1 or LSS-2 Transducer. If the 20' transducer cable is not long enough, the 10' extension cable is available. Enhance your Lowrance sonar system with the Lowrance...

Rugged, high-speed, moisture and solvent-resistant data cable withstand the toughest onboard marine environments. For Lowrance models with 5-pin yellow ethernet connector. Designed for demanding marine environments, the Lowrance ETHEXT-50YL Ethernet...

Bracket for Mark/Elite 4 & 5 models.Works with: Lowrance Elite-5, Elite-5m, Elite-5x, Mark-5x, Mark-5x Pro, Simrad go5 Designed specifically for compatibility with Lowrance Mark and Elite series models including the Mark-5x, Mark-5x Pro, Elite-5,...

Works with: IntelliMap 320, IntelliMap 480, IntelliMap 500C, IntelliMap 502C iGPS, IntelliMap 642C iGPS, Elite-5M The Lowrance PC-24U 5M Power Cable is designed to ensure a secure and consistent power supply for your Elite series fishfinders and GPS...

Gimbal Knob Set for all HDS units. Included with purchase of GB-19 gimbal bracket. The Lowrance GK-12 Gimbal Knob Set is designed specifically for all HDS series units, providing a reliable and easy-to-use upgrade for your marine electronics. These...

SimNet to N2K Adaptor Kit - Connect Simrad heading sensor (FC40, RC42) toNMEA 2000 network; includes Simnet-to-N2k male adaptor, Simnet-2 Joiner,T connector. The Lowrance SimNet to N2K Adapter Kit is designed to seamlessly connect your Simrad heading...

TM Transducer for DSI with TempDual frequency DSI Skimmer transducer 455/800kHz with built in temp. Includes 20ft cable, mounting bracket and hardware.Replacement DSI skimmer transducer.Works with: Elite-5 DSI, Elite-5x DSI, Mark-5x DSI Enhance your...

Attaches transducer to a trolling motor.Works with: Elite-5 DSI, Elite-5x DSI, Mark-5x DSI The Lowrance Trolling Motor Transducer Bracket (Part Number 000-10261-001) offers a reliable mounting solution for your DSI transducer. Crafted specifically for...

CVR-16 Screen CoverPart #: 000-10050-001The CVR-16 Screen Cover works with all Lowrance Mark-5 and Elite-5 models.Works With: Elite-5 Elite-5x Mark-5x Mark-5x Pro The Lowrance CVR-16 Screen Cover (Part #: 000-10050-001) is designed to protect the...

Kayak Scupper Transducer MountLowrance's transducer mounting systems for sit-on-top fishing kayaks. The Transducer Kayak Scupper Mount is perfect for all HDS, Elite, Mark and X-Series Lowrance Skimmer transducers, both 83/200 kHz and 455/800 kHz DownScan...

LSS-2 StructureScan HD Sonar Imaging Transom Mount TransducerPart #: 000-10802-001Lowrance's LSS-2 StructureScan HD transom mount transducer that features Sonar Imaging. Enhance your fishing and boating experience with the Lowrance LSS-2 StructureScan...

HDI 83/200 455/800 Skimmer TransducerWorks w/ Elite-7 combo and fishfinder models, plus HDS Gen2 Touch fishfinder and combo modelsHDI Skimmer transducer 83/200/455/800kHz with built in temp. Includes mounting bracket and hardware. Cable Length 6m...

HDI 50/200 455/800 Skimmer TransducerWorks w/Elite 7 HDI, HDS Gen2 Touch, Hybrid Dual Imaging 50 kHz XDCR The Lowrance HDI Skimmer 50/200 455/800 T/M Transducer is designed for precise fish detection and detailed underwater imaging. Compatible with...

HDI Trolling Motor XDCR Adapter CupFor using HDI 83/200 and 455/800 kHz XDCR on a trolling motor The Lowrance HDI Trolling Motor Adapter Cup (Part #000-10978-001) is designed to facilitate the use of HDI 83/200 and 455/800 kHz transducers on compatible...

Video Adapter Cable for HDS Gen2Features: 2 ft. adapter cable connects to existing power cable and adds video input connection For displaying video from rear-view, underwater, engine monitoring and night vision cameras or from any video source providing...

Gimbal Bracket and Knobs for 9" Lowrance unitsGimbal Mounting Bracket f/HDS-9 Gen2 Touch/HDS Gen3/HDS Carbon/Elite-Ti/Hook/Elite-Chirp The Lowrance Gimbal Bracket and Knobs are designed specifically for 9-inch Lowrance HDS series units, including...

Gimbal Mounting Bracket f/HDS-7 Gen2 Touch and Elite-7 with knobs The Lowrance Gimbal Mounting Bracket (Part Number 000-11019-001) is designed to provide a secure and adjustable mounting solution for your HDS-7 Gen2 Touch and Elite-7 fishfinders with...

Gimbal Mounting Bracket f/HDS-12 Gen 2 Touch ModelsGimbal mounting bracket with knobs for 12" HDS Gen2 Touch/HDS Gen3/HDS Carbon/Elite-Ti The Lowrance Gimbal Mounting Bracket, part number 000-11021-001, offers a reliable and secure mounting solution for...

N2KEXT-6RD 6' NMEA 2000 Cable 6' NMEA 2000 Cable The Lowrance N2KEXT-6RD 6-foot NMEA 2000 Cable is designed for seamless integration of marine electronics, allowing reliable data communication between devices. Constructed with high-quality materials,...

P66-BL Transom Mount Triducer Multisensor Blue ConnectorThe P66 is the best performing and most popular, transom mount, triducer multisensor in the market for many reasons. Foremost, the 50 kHz and 200 kHz, oversized, ceramic element produces focused...

B117 Bronze Thru-Hull Low-Profile 600 W Blue ConnectorApplications Planing hull powerboats Sailboats Features Industry standard for low-profile transducers Depth and temperature Good target detail in shallow-water at 200kHz and good deep-water bottom...

Suncover for Elite-4 HDI Series and Hook-4 SeriesMake sure your unit continues to work like new by protecting it with the Elite-4 HDI Series suncover. This sturdily made cover fits perfectly. It protects from overexposure to sun glare during long boat...

Adapter cable, 7 pin BLUE to bare wires The Lowrance 000-10046-001 adapter cable provides a reliable connection between 7-pin Blue connectors and bare wire installations, making it ideal for marine and boat electronic systems. Designed for compatibility...

50/200kHz Skimmer Transducer Mounting KitFeatures: 50/200kHz Skimmer transducer mounting kit Heavy duty plastic mounting bracket The Lowrance 50/200kHz Skimmer Transducer Mounting Kit provides a reliable and easy-to-install solution for mounting...

HS-WS-SS Mounting KitMounting kit for transom mount 83/200 kHz skimmer transducers The Lowrance 83/200 Skimming Transducer SS Mounting Kit is designed to securely attach transom-mounted 83/200 kHz skimmer transducers to your boat. Crafted from durable...

LSS-2 HD Skimmer Mounting Bracket - Stainless SteelMounting bracket for LSS-2 StructureScan HD transducer.Specifications:Stainless Steel The Lowrance LSS-2 Skimmer Mounting Bracket made of durable stainless steel provides a secure and reliable...

Lowrance Outboard Cable-Steer Pilot PackEverything you need in one box to fit an autopilot to your outboard motor, the Outboard Pilot lets you focus on fishing activity while keeping the boat on course. When connected to a Lowrance HDS Gen2 or Gen2...

Fuel Flow Sensor with 10' cable 1 PSI at 40 Gal/hrInstallation Location: Above the max level of the fuel tank, in-line after the fuel filter and any Y's or T's in the linePackage: The Fuel Flow Sensor, N2K T and 2 (two) 1" hose clampsFuel Type: Gasoline...

Lowrance TR-120-KITSet of 1 male and 1 female NMEA 2000r7reg; terminators The Lowrance TR-120-Kit offers a reliable solution for establishing proper termination in NMEA 2000 networks, ensuring optimal data transmission and system stability. This set...

TotalScan Transom Mount transducerAn all-in-one transducer that matches proven CHIRP sonar with StructureScan HD and DownScan Imaging technology, making it possible to target fish and search for fish-holding structure with the same transducer.The...

Fuel Data ManagerMonitors Fuel Rate/Fuel Flow from NMEA 2000 engines, and accumulates Fuel Rate into Fuel Used. Outputs seasonal, trip and total fuel used.Features Replaces EP-85 Monitors Fuel Rate/Fuel Flow from NMEA 2000 engines, and accumulates Fuel...

EP-80R Temperature Sensor -NMEA2000 Transom MountReplaces EP-80 Pre-configured as Water Temperature Can be reconfigured* to output the following temperature types: Outside Inside Engine Room Cabin Live Well Bait Well Refrigeration Heating...

Temperature Sensor Thru-HullReplaces EP-80 Pre-configured as Water Temperature Can be reconfigured* tooutput the following temperature types: Outside Inside Engine Room Cabin Live Well Bait Well Refrigeration Heating System *can only be...

Transom Mount Speed SensorTransom-mount paddle wheel 3.1 m (10ft) cable with Micro-C connector.Features Replaces EP-70 Outputs speed through water Transom-mount paddle wheel Ideal for slow, trolling speeds, where GPS is not as accurate Share paddle...

Suncover for HDS-9 Gen3Make sure your fishfinder/charplotter continues to work like new by protecting it with the Lowrance sun cover. This sturdily made cover fits your GPS system perfectly. It protects your GPS from overexposure to sun glare during long...

Micro-C Network Power IsolatorLowrance's Micro-C Network Power Isolator ensures sources that could power the bus are separated properly during installation. The Lowrance Micro-C Network Power Isolator is designed to ensure proper separation of power...

HDS Carbon 16 Bracket AssemblyBracket for the Lowrance HDS Carbon 16. The Lowrance HDS Carbon 16 Bracket Assembly is a durable and precisely engineered mounting solution designed specifically for the Lowrance HDS Carbon 16 fishfinder. Constructed to...