Victron Energy Orion-TR Smart 12/12-30A (360W) Isolated DC-DC Charger and Power Supply

Orion-TR Smart 12/12-30A (360W) Isolated DC-DC Charger or Power Supply

The Orion-Tr Smart isolated DC-DC charger serves as a DC-DC battery charger or a power supply (also designed for use as a constant voltage source), offering a wide input and output voltage range. This is especially significant in the case of vehicles with a Euro 5 or Euro 6 smart alternator, which often supplies too low charging voltage even when the engine is running or when extended cable lengths, as is often the case in boats and RVs, lead to voltage drops. In such scenarios, precise and controlled charging is imperative to fully charge the service battery while protecting the starter/input battery from discharge.

Bluetooth Smart Enabled

• Any Bluetooth-enabled smartphone, tablet, or other device can be used to monitor, change settings, and update the charger when new software features become available


• Instant Readout: The VictronConnect App can display key data, including warnings and alarms, on the device list page without the need to connect to the product

Fully programmable

• Battery charge algorithm (configurable) or fixed output.


• Smart Alternator Compatibility: engine running detection mechanism

Adaptive 3-Stage Charge Algorithm: Bulk Absorption Float

• For lead-acid batteries, it is important that during shallow discharges the absorption time is kept short to prevent overcharging of the battery. After a deep discharge, the absorption time is automatically increased to make sure that the battery is completely recharged


• For lithium batteries, the absorption time is fixed; the default is 2 hours


• Alternatively, a fixed output voltage can be chosen

Suitable for Use in Vehicles with a Smart Alternator (Euro 5 and Euro 6 Engines)

The built-in engine shutdown detection will stop the converter when the engine is not running. This prevents unwanted discharge of the starter battery (see manual for details).

Remote On/Off

A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two-pole connector can be switched to battery minus (or the chassis of a vehicle, for example).

All Models Are Short Circuit Proof and Can Be Paralleled to Increase Output Current

An unlimited number of units can be connected in parallel.

High Temperature Protected

The output current will reduce at high ambient temperatures.

IP43 Protection

When installed with the screw terminals oriented downward.

Screw Terminals

No special tools are needed for installation. Input fuse (not replaceable)

*Input fuse (not replaceable)

Specifications:

• Input Voltage Range: 10-17 V


• Under Voltage Shut Down: 7 V


• Under Voltage Restart: 7.5 V


• Nominal Output Voltage: 12.2 V


• Output Voltage Adjust Range: 10-15 V


• Output Voltage Tolerance: +/- 0,2 V


• Output Noise: 2 mV rms


• Cont. Output Current at Nominal Output Voltage and 40 Degrees C: 30 A


• Maximum Output Current (10 S) at Nominal Output Voltage minus 20%: 40 A


• Short Circuit Output Current: 60 A


• Cont. Output Power at 25 Degrees C: 430 W


• Cont. Output Power at 40 Degrees C: 360 W


• Efficiency: 87 %


• No Load Input Current (2): < 80 mA


• Standby Current: Less than 1A


• Can Be Used as Power Supply: Yes, output voltage can be set with Bluetooth


• Galvanic Isolation: 200 VDC between input, output, and case


• Operating Temperature Range -20 to +55 C (derate 3 % per C above 40 C)


• Humidity: Max. 95 % non-condensing


• DC Connection: Screw terminals


• Maximum Cable Cross-Section: 16 mm AWG6


• Weight: 1,8 kg (3 lb)


• Dimensions (H x W x D):130 x 186 x 70 mm (5.1 x 7.3 x 2.8 inch)


• Protection Category IP43 (electronic components), IP22 (connection area)


• Safety Standards: EN 60950


• Emission/Immunity Standards: EN 61000-6-3, EN 55014-1 / EN 61000-6-2, EN 61000-6-1, EN 55014-2


• Automotive Directive Standards: ECE R10-5

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

The Victron Energy Orion-TR Smart 12/12-30A (Part Number: ORI121236120) is a versatile isolated DC-DC charger and power supply designed for demanding vehicle and marine applications. It provides reliable, precise charging and power conversion capabilities with a wide input voltage range from 10 to 17 volts, making it ideal for vehicles with Euro 5 or Euro 6 smart alternators that often supply low voltages or experience voltage drops over long cable runs. The device ensures your batteries are fully charged while protecting your starter battery from unwanted discharge, offering peace of mind during extended trips or complex electrical setups.

Equipped with Bluetooth Smart technology, the Orion-TR allows users to monitor and configure the charger remotely using a smartphone or tablet with the VictronConnect app. This feature provides instant readouts of key parameters, including warnings and alarms, without the need for physical connections. Fully programmable, it supports customizable charge algorithms for different battery types, including lead-acid and lithium, with adaptive three-stage charging for lead-acid batteries—shortening absorption times during shallow discharges and increasing them after deep discharges. The default fixed absorption time of 2 hours for lithium batteries simplifies setup, while the output voltage can be manually set to suit your needs.

Designed to work seamlessly with vehicles equipped with Euro 5 and Euro 6 engines, the Orion-TR automatically detects engine shutdowns to prevent unnecessary battery drain. Its remote On/Off feature allows easy control via relay or switch connections, providing flexibility for integrating into your existing electrical system. The device's short circuit proof design allows multiple units to be paralleled to increase total output current, with an unlimited number of units supported. High temperature protection reduces output current at elevated temperatures, ensuring safe operation. Its robust IP43 protection rating when installed properly guarantees durability in demanding environments.

Constructed with screw terminals for straightforward installation, the Orion-TR offers a maximum continuous output power of 430 watts at 25°C and a peak output of 60 amps. It features galvanic isolation between input, output, and case, and complies with relevant safety and emission standards including EN 60950 and EN 61000-6 series. The device’s compact design measures approximately 6 inches in length, 7.3 inches wide, and 2.8 inches deep, weighing about 3 pounds. It operates efficiently across a temperature range from -20°C to +55°C, with humidity tolerance up to 95% non-condensing, making it suitable for a variety of mobile and stationary applications. For detailed installation and operation instructions, refer to the owner’s manual available online.

Please note that this product may contain chemicals known to the State of California to cause reproductive harm, and appropriate precautions should be observed. For support or repairs, contact your dealer. The Orion-TR is an essential component for ensuring safe, reliable power management in modern mobile electrical systems.

Features:

• Wide input voltage range of 10-17 V for versatile vehicle compatibility

• Bluetooth Smart enabled for remote monitoring, configuration, and updates via VictronConnect app

• Fully programmable charge algorithms for lead-acid and lithium batteries

• Adaptive 3-stage charging with automatic adjustment for deep or shallow discharges

• Engine shutdown detection to prevent unwanted battery drain in vehicles with smart alternators

• Remote On/Off control with relay or switch connection options

• Short circuit proof design supports unlimited parallel units for increased current

• High temperature protected, reducing output at elevated temperatures

• IP43 protection rating for durability in harsh environments

• Galvanic isolation of 200 VDC between input, output, and case for safety

• Compact, easy-to-install screw terminal connection system

• Supports maximum continuous power output of 430 watts with peak of 60 amps

• Meets safety and emission standards including EN 60950 and EN 61000-6 series

• Robust construction suitable for mobile and stationary applications