Victron Energy Orion-TR 24/12-30A (360W) Isolated DC-DC Converter

Orion-TR 24/12-30A (360W) Isolated DC-DC Converter

Isolated Model - separate in and out (-) leads

Remote On/Off Terminal

The remote on/off terminal eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or for example the engine run/stop switch.

All Models Are Short Circuit Proof and Can Be Paralleled to Increase Output Current

An unlimited number of units can be connected in parallel.

High Temperature Protected

The output current will reduce at high ambient temperatures.

IP43 Protection

When installed with the screw terminals oriented downward.

Screw Terminals

No special tools are needed for installation.

Input Fuse (not replaceable)

On 12 V and 24 V input models only.

Adjustable Output Voltage

Not intended for battery charging (consider using an Orion-Tr Smart for battery charging).

Specifications:

• Input Voltage Range: 20-35 V


• Under Voltage Shut Down: 14 V


• Under Voltage Restart: 15 V


• Nominal Output Voltage: 12.2 V


• Output Voltage Adjust Range: 10-15 V


• Output Voltage Tolerance: +/- 0,2 V


• Output Noise: 2 mV rms


• Cont. Output Current at Nominal Output Voltage and 40 Degrees C: 30 A


• Maximum Output Current (10 S) at Nominal Output Voltage: 45 A


• Short Circuit Output Current: 60 A


• Cont. Output Power at 25 Degrees C: 430 W


• Cont. Output Power at 40 Degrees C: 360 W


• Efficiency: 88 %


• No Load Input Current (2): < 100 mA


• Current Consumption: < 200uA when disabled via its remote port


• Galvanic Isolation: 200 VDC between input, output, and case


• Operating Temperature Range: -20 to +55 Degrees C (derate 3 % per C above 40 C)


• Humidity: Max. 95 % non-condensing


• DC Connection: Screw terminals


• Maximum Cable Cross-Section: 16 mm AWG6


• Weight: 1.3 kg (3 lb)


• Dimensions (H x W x D): 130 x 186 x 70 mm (5.1 x 7.3 x 2.8 inch)


• Safety Standards: EN 60950


• Immunity Standards: EN 61000-6-2, EN 61000-6-1, EN 55014-2


• Automotive Directive Standards: ECE R10-5

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

The Victron Energy Orion-TR 24/12-30A (Part Number: ORI241240110) is a reliable isolated DC-DC converter designed for demanding electrical systems. This model features a galvanic isolation of 200 VDC between input, output, and case, ensuring safe and stable power conversion. It is equipped with screw terminals for straightforward installation and includes a remote On/Off terminal that allows control with low power switches or engine run/stop systems. The device’s IP43 protection rating enables installation with downward-oriented screw terminals, providing durability in various environments.
The Orion-TR is built to handle high current loads, with a continuous output current of up to 30 amps at a nominal 12.2 V output, and a maximum short-circuit current of 60 amps. Its efficient design achieves an 88% conversion rate, minimizing energy loss during operation. The converter supports a wide input voltage range of 20-35 V and features adjustable output voltage from 10 to 15 V, making it versatile for different applications.
This model is short circuit proof and can be paralleled with an unlimited number of units to increase total output current, providing scalability for larger power needs. It is protected against high temperatures, with output current reducing as ambient temperatures exceed 40°C, and it operates reliably within a temperature range of -20°C to +55°C. The device is compliant with safety standards EN 60950 and immunity standards EN 61000-6-2, EN 61000-6-1, and EN 55014-2, ensuring compliance with international safety and electromagnetic compatibility requirements.
Designed for ease of installation, it features screw terminals compatible with cable cross-sections up to 16 mm² (AWG6). Its compact dimensions and lightweight of approximately 1.3 kg (3 lbs) make it suitable for various vehicle and industrial applications. Please note that the input fuse is only available on 12 V and 24 V input models and is non-replaceable. For detailed installation instructions and safety information, refer to the manufacturer’s manual available online.
This product is suitable for use in automotive, marine, and industrial environments where reliable power conversion and high current capacity are essential. The Orion-TR’s robust design, combined with its flexible features such as adjustable output voltage and parallel capability, makes it an excellent choice for complex electrical systems requiring isolated power supplies.

Features:

• Galvanic isolation of 200 VDC for safe power conversion

• Remote On/Off terminal for low power control

• IP43 rated for durable installation with downward screw terminal orientation

• Short circuit proof with unlimited parallel capability for increased current

• Adjustable output voltage range from 10 to 15 V

• High efficiency of 88% to reduce energy loss

• Wide input voltage range of 20-35 V

• Supports continuous output current up to 30 A and peak of 45 A

• Built-in high temperature protection with current derating above 40°C

• Compliant with international safety and EMC standards