Blue Sea Systems 8132 AC Toggle Source Selector for 230V Systems

• Double pole AC main circuit breakers with installed lockout slide
  
• Prevents connecting both AC sources simultaneously
  
• Maximum panel amperage - 50 Amperes
  
• Red reverse polarity indicating LED
  
• All hot, neutral and safety ground buses installed, fully pre-wired
  
• All circuit label positions are backlit on standard panels - No kit required
  
• "ON" indicating LEDs installed in all circuit positions
  
• MIL-C-5541C or equivalent immersion undercoating for lifetime corrosion resistance
  
• Two-part polyurethane slate gray finish
  
• Heavy 1/8" aluminum 5052 alloy
  
• Industry standard height and width
  
• Countersunk mounting holes throughout
  =
• Detailed installation instructions and cutout template included
  
• Includes set of 30 common Large Format Labels
  
• Over 500 individual labels available
  
• For 230V AC Systems

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

The Blue Sea Systems 8132 AC Toggle Source Selector is designed for reliable switching between two AC power sources in 230V systems. Crafted from heavy-duty 1/8" aluminum alloy with a durable polyurethane slate gray finish, this switch ensures longevity and resistance to corrosion through MIL-C-5541C or equivalent immersion undercoating. Its industry-standard height and width allow for seamless integration into existing panels, while countersunk mounting holes facilitate straightforward installation. The device features all hot, neutral, and safety ground buses pre-wired for quick setup and includes comprehensive installation instructions and a cutout template. The source selector incorporates two 16A double pole circuit breakers with a lockout slide, preventing simultaneous connection of both sources and ensuring operational safety. All circuit positions are equipped with "ON" LEDs for status indication, and a red reverse polarity LED alerts users to wiring issues. The panel's backlit labels improve visibility, with a set of 30 large format labels included for customization, supporting over 500 label options in total. This product is suitable for applications requiring dependable power source management in 230V AC electrical systems, with a rated maximum panel amperage of 50 Amperes. Safety is further enhanced by industry-standard design features, and the product complies with relevant standards for industrial electrical components. For detailed installation guidance, refer to the provided owner’s manual available online. Please note, this product contains chemicals that may pose health risks as identified by California’s Proposition 65, and appropriate precautions should be taken during handling and installation.

Features:

• Double pole AC main circuit breakers with installed lockout slide for safety and prevention of simultaneous source connection

• Maximum panel amperage of 50 Amperes suitable for 230V AC systems

• Red reverse polarity indicating LED to alert users of wiring issues

• All hot, neutral, and safety ground buses are fully pre-wired for quick installation

• Backlit circuit labels on standard panels for improved visibility without additional kits

• "ON" indicating LEDs in all circuit positions for clear status monitoring

• Constructed from heavy 1/8" aluminum 5052 alloy with MIL-C-5541C or equivalent corrosion-resistant coating

• Industry-standard height and width with countersunk mounting holes for secure installation

• Includes detailed installation instructions, cutout template, and a set of 30 large format labels

• Over 500 label options available for customization of circuit identification