Lenco Marine Edgemount Trim Tab Kit with LED Indicator Switch - 12V, Part Number TT12X18EI

Edge Mount

Mounts the actuator at the trailing edge of the plane, requiring 4 less transom height than standard mount

Trim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious.

• Instant response electric actuators for precise control
  
• Everything is fully submersible, maintenance-free and sealed for life
  
• Self-locking ballscrew will not drift, even while backing down
  
• 12-gauge laser cut stainless steel trim tab planes
  
• High-impact corrosion-proof mounts look great through years of abuse
  
• Clean, time and space-saving installation
  
• Actuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case
  
• 316 super buff stainless steel rams

Tactile Switch w/ Indicator LED for all Single Actuator Trim Tab Systems
Features:

• Self-contained, sealed keypad
  
• Self-contained, sealed control box module
  
• Fade/smudge-proof, laser engraved graphics
  
• Plug & play switch wiring harness connector
  
• Includes 36" power pigtail for control box
  
• 2" hole cut-out size, overall size 2.75" x 2.75"
  
• Built-in retract feature returns tabs to a fully retracted position when power is removed
  
• 2 high-intensity L.E.D. indicator displays show the exact position of our trim tabs at all times
  
• Photo eye reads ambient light and adjusts the L.E.D. indicator display intensity for optimum viewing in direct sunlight
  
• 12 & 24-volt compatibility
  
• Includes Self-Check Feature

Each Kit Includes:

• Tactile LED Indicator Switch Kit
  
• 2 Actuators with 6' lead & Deutsch Plugs
  
• 2 20' Actuator Extension Wiring Harness
  
• 2 12 gauge Stainless steel trim tab planes
  
• 2 Upper Mounting Bracket with Gland Seal
  
• 2 Lower Mounting Bracket
  
• All stainless steel mounting hardware

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Upgrade your boat's performance and safety with the Lenco Marine Edgemount Trim Tab Kit, designed for precise control and enhanced ride quality. This system mounts the actuator at the trailing edge of your vessel, reducing transom height requirements by four inches compared to standard mounts, making installation easier and more flexible. The kit features 12-inch by 18-inch laser-cut stainless steel trim tab planes that are corrosion-proof and built to withstand harsh marine environments.
Built with a self-locking ballscrew design, these electric actuators provide instant response and are three times more powerful than traditional hydraulic systems. Fully sealed and maintenance-free, the actuators are oil-free, environmentally conscious, and equipped with high-impact, ultraviolet-resistant nylon cases and super buff 316 stainless steel rams for durability. The system includes high-impact mounts that look great over years of use, and the installation is clean, space-saving, and straightforward.
The tactile switch with LED indicators allows for precise, real-time control of the trim tabs. It features a sealed, self-contained keypad, a control box module with fade-proof graphics, and a plug-and-play wiring harness for easy setup. The LED indicators display the trim tab position at all times, with ambient light adjustment for visibility in direct sunlight. The system is compatible with both 12- and 24-volt power supplies and includes a built-in retract feature that automatically returns the tabs to a fully retracted position when power is off. Each kit encompasses all necessary hardware, including actuators, extension wiring harnesses, stainless steel mounting brackets, and stainless steel hardware, simplifying installation.
Designed for boat owners seeking reliable, high-performance trim control, this system enhances ride smoothness, dryness, speed, and safety whether on small skiffs or large yachts. Its environmentally friendly design and durable components ensure long-lasting performance in demanding marine conditions. Please note, this product contains chemicals known to cause reproductive harm, and it may not be returnable to the point of purchase. For concerns, contact the manufacturer directly.

Features:

• Edge mount design reduces transom height requirement by 4 inches

• Instant response electric actuators for precise control

• Fully sealed, maintenance-free, and oil-free for environmental safety

• High-impact corrosion-proof stainless steel mounts

• Laser-cut stainless steel trim tab planes for durability

• High-impact, ultraviolet-resistant nylon actuator cases

• 316 super buff stainless steel rams for corrosion resistance

• Self-locking ballscrew prevents drift when backing down

• Tactile switch with LED indicator for accurate control

• Sealed keypad and control box with fade-proof graphics

• Plug & play wiring harness for quick installation

• Built-in retract feature for automatic tab retraction

• Ambient light-sensitive LED indicators for visibility

• Compatible with 12V and 24V power supplies

• Includes all mounting hardware and extension wiring harnesses