Actisense A2K-TDC-10M NMEA 2000 Micro Cable Assembly – 10 Feet for Marine Electronics

A2K-TDC-10M NMEA2000 Micro Cable Assembly - 10M

Available in various lengths, the cable assemblies can be used as either drop cable from a NMEA 2000 backbone or to extend the length of the backbone cable.

Actisense Lite cable assemblies allow quick installation and come with quality reassurance as only the Actisense UL-certified cable is used.

NMEA 2000 cable includes five wires within a single waterproof cable: power and ground wires, two signal (data) wires, and a drain wire. The drain wire connects to the cable shield, which protects the signal, power, and ground wires from external Radio Frequency Interference (RFI) and helps reduce RFI emission from the cable.

NMEA 2000 Lite cable can be used to create a backbone up to 100 meters in length. If the backbone length required exceeds 100 meters, the center of the bus can be extended with an NMEA 2000 mini cable to keep the outer Lite sections to the 100-meter maximum.

The maximum length of a drop cable (distance from the backbone) is 6 meters. It is important to limit each drop length to the minimum required, as the total of all drop lengths must not exceed 72 meters.

The Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.

Technical Specifications:

• Rated Current - 3A


• Rated Voltage - 60VDC


• Male Contact - Brass, gold-plated


• Female Contact - Phosphor bronze, gold plated


• Contact Carrier - PBT, black


• Contact Polarization - Standard M12 -A- polarization


• Mating Thread - M12


• Screw Cap - Brass, nickel plated


• O-Ring Seal - Rubber, black


• Housing - PVC, black


• Power Pair - 22 AWG (19-strand tinned copper)


• Data Pair - 24 AWG (19-strand tinned copper)


• Drain - 22 AWG (19-strand tinned copper)


• Braid - 37 AWG (tinned copper)


• Jacket Material - 0.8mm Nom. PVC, black


• Jacket Outer Diameter - 6.85mm 0.254mm


• Weight - 688g


• Protection - IP67 (when mated)


• Operating Temperature - -20C to +70C


• Storage Temperature - -40C to +85C

The Actisense A2K-TDC-10M is a high-quality NMEA 2000 micro cable assembly designed for seamless integration of marine electronic systems. This 10-foot waterproof cable provides a reliable connection for extending or creating backbone networks in boat navigation and communication setups. It features five internal wires, including power, ground, two data signals, and a drain wire, all protected within a durable, IP67-rated jacket that ensures protection against water and dust when mated. The cable's construction minimizes Radio Frequency Interference (RFI), enhancing signal integrity and reducing external noise interference, which is critical for accurate data transmission in marine environments. The cable is ideal for use as a drop cable or to extend the backbone length, supporting networks up to 100 meters with optional mini cables for longer runs. The design incorporates corrosion-resistant brass, gold-plated contacts, and a black PVC housing, ensuring durability and reliable connections in harsh conditions. The rated current of 3A and voltage of 60VDC make this cable suitable for various sensors and electronic devices onboard. The included connectors feature standard M12 polarization and mating threads, with rubber O-ring seals for enhanced waterproofing. The cable's power and data pairs utilize 22 AWG and 24 AWG tinned copper conductors respectively, with an outer diameter of approximately 0.27 inches, providing flexibility and ease of installation. Conforming to IP67 standards when mated, this cable ensures long-lasting performance in marine environments, capable of operating within temperature ranges from -20°C to +70°C and storing from -40°C to +85°C. Whether used for new installations or upgrades, the Actisense A2K-TDC-10M offers a dependable, certified solution for marine network connectivity, backed by quality assurance and technical support. For detailed installation and operational guidance, consult the official manual available online.

Features:

• Rated Current: 3A for reliable power transmission

• Rated Voltage: 60VDC suitable for marine electronics

• Waterproof IP67 rating ensures protection against water and dust when mated

• High-quality brass and phosphor bronze contacts with gold plating for corrosion resistance

• Standard M12 polarization and threading for secure connections

• Rubber O-ring seal provides enhanced waterproofing

• Durable PVC housing with a black finish for rugged marine environments

• Power pair: 22 AWG, Data pair: 24 AWG, Drain: 22 AWG, Braid: 37 AWG for optimal signal integrity

• Supports backbone lengths up to 100 meters with optional mini cables for extended networks

• Drop cable length limited to 6 meters to maintain network performance

• Constructed with tinned copper conductors for corrosion resistance

• Outer diameter approximately 0.27 inches for flexible installation

• Operating temperature range from -20°C to +70°C with storage from -40°C to +85°C

• Includes high-quality connectors and a waterproof design for marine applications