Bearings/Hubs/Brakes

Marine Grade Wheel Bearing Grease - 14 ozPrevents rust and corrosion damage from saltwater, salt air, and atmospheric chemicals. Designed for marine and outdoor metal surfaces exposed to harsh environmental conditions. The protective barrier extends...

10 Knott Disc Brake KitLoad Rite's 5-lug, 10-inch vented integral rotor disc brake kit is manufactured by AutoFlex KNOTT and fits KNOTT 3,700 lbs. capacity 5-bolt axles.Kit Includes: Vented cupped and studded, zinc rotor, and hub assembly Loaded caliper...

9.6 Dexter Vented Rotor Disc Brake KitLoad Rite's 5-lug, 9.6-inch vented rotor disc brake kit is manufactured by Dexter and fits a standard 3,750 lbs capacity spindle.Kit Includes: Vented rotor with Galvx finish Aluminum caliper with e-coat...

Brake Pads 10 12 Disc Full Axle 2 Sets Inner OuterFeatures: Optimal at Transferring Heat Generated From Braking Use with EITHER 10 or 12 Disc Brake Rotor Assemblies Sold as FULL SET, BOTH Inner and Outer Assemblies, for ONE (1) Complete Axle Weight: 2...

Rotor Complete Kit Vented 9.75 Integral, No Grease 5 Stud Dacromet Finish KnottComplete 9.75 Disc Brake Rotor Assembly Manufactured by Autoflex Knott.Replacement Disc Brake Rotor Assembly: Fits 5 on 4.5 Bolt Pattern. Inorganic, Dacromet, VOC Compliant,...

6.6K Disc Brake Actuator - Tie Down Engineering - Fits 2 Hitch Ball6,600 lbs Capacity, Tie Down Engineering Disc Braking, Surge ActuatorSpecifications: 6,600 lbs Capacity Fits 2 Hitch Ball For Use with Disc Brakes The Load Rite by Dexter 6.6K Disc...

7.7K Disc Brake ActuatorSpecifications: Disc Braking Surge Actuator Tie Down Engineering Capacity: 7,700 lbs For use with Disc Brakes The Load Rite by Dexter 7.7K Disc Brake Actuator is engineered for reliable and efficient braking performance in...

10 Dexter Brake KitNote: No mounting bracket is required for the 5-bolt kit, but a plate will be included in the 6-bolt.Specifications: Calipers: Aluminum Size: 10 The Load Rite 10-inch Dexter Brake Kit (Part 4265.73D) is designed to deliver reliable...

Knott Disc Brake Caliper with Brake Pads Left SideFeatures: Autoflex Knott Brand Disc Brake Caliper Assembly Left Hand Assembly (Drivers Side) Dacromet Finish Ships Complete with Brake Pads Sliding Pins Installed Fits 10 Autoflex Knott Disc Braking...

Actuator 8.5K - 2 BallSpecifications: 8,500 lbs Capacity Fits 2 Hitch Ball For Use with Disc Brakes The Load Rite Dexter 6080.77 actuator is designed to deliver reliable performance for your trailer braking system. With a robust capacity of 8,500 lbs,...

Actuator 20K Disc Brake 2-5/16th DemcoLoad Rites 20,000lb capacity disc brake actuator.Features: 20K Disc Braking Actuator Demco Brand Bolt on Zinc Plated 2-5/16 ball coupler 3 channel tongue The Load Rite 20K disc brake actuator (Part Number: 6080.74)...

Trailer Hub KitHub Kits come complete and ready to install on your axel. Simply remove your old hub and replace with this pre assembled and pre greased hub. Comes with dust cap, cotter pin and wheel nuts. Spindle: 1-3/8" - 1-1/16" Bolt Cir: 5 x 4...

Hub Kits come complete and ready to install on your axel. Simply remove your old hub and replace with this pre assembled and pre greased hub. Comes with dust cap, cotter pin and wheel nuts. Spindle: 1-1/16" Bolt Cir: 5 x 4.5 Cap: 1350 Flange O.D.:...

Hub Kits come complete and ready to install on your axle. Simply remove your old hub and replace with this pre assembled and pre greased hub. Comes with dust cap, cotter pin and wheel nuts. WARNING: This product can expose you to chemicals including...

Grease Seals f/1" to 1-1/16" Straight SpindleProduct DescriptionNeed to reseal trailer wheels No need to purchase an entire wheel bearing set when all you need are the seals. Smith "double-lip seals with gripper springs" are the best available and...

CE Smith Dust Caps - Hub ID 1.980" - (Pair)Product DescriptionUse this dust cap to protect your axle nut.Features: Fits hub with inner diamerter of 1.98" Sold in pairs WARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which...

Trailer Hub Kit - 1-3/8" x 1-1/16" Tapered - 5 x 4-1/2" GalvanizedFeatures: 1-3/8" x 1-1/16" Tapered 5 x 4-1/2" Galvanized WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp),LEAD which are known to the State of...

HubMate Wheel Bearing ProtectorsHubMate bearing protectors replace the dust caps in the wheel hub. The accessible grease fitting allows you to add grease without disassembling it. Positive grease pressure keeps water and dirt out.Features: Outer hub...