BPS Marine BPS-1 1-Transducer Ultrasonic Antifouling System for Boats up to 20ft

BPS-1 1-Transducer Ultrasonic Antifouling System - 12VDC

The BPS-1 is a single transducer system that can add antifouling protection to hulls, drives, rudders, stabilizers, and more. This single system can provide ultrasonic antifouling protection for hulls up to 20ft in length or can be combined with additional systems for larger vessels. The BPS-1 can also be tasked with protecting drives and rudders.

The BPS-1 Package Includes:

• 1x BPS-1 Control Module with Integrated Power Cable


• 1x Submersible Ultrasonic Transducers with 15ft of Cable


• 1x Epoxy Kit


• 1x Printed Installation and Operation Manual

Specifications:

• Voltage: 12V or 24V DC


• Average Power Draw: 0.25Ah


• Transducer Strength: 60W


• Cable Length: 15ft per transducer


• Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz)

Installation Overview:

• No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy.


• Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller.


• Mounting the Controller: The BPS-1 Controller runs off of your boats existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel.


• Enjoy Worry-Free Boating: Thats it! Your BPS system is done! Let our advanced antifouling protection do its job. Each system is programmed with a multi-frequency sweeping algorithm to ensure that your boat has the best antifouling protection on the market.

How the Technology Works:

• The Mechanism: The system emits high-frequency ultrasonic waves through the hull drives, creating a microscopic barrier of resonance.


• Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach.


• Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations.


• Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans.

Benefits:

• Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed.


• Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs.


• Diver Savings: Reduces the need for monthly hull cleaning services.


• Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders.


• Fit Forget: Once installed, the system runs automatically with zero scheduled maintenance required.

The BPS Marine BPS-1 1-Transducer Ultrasonic Antifouling System is an innovative solution designed to protect your boat’s hull, drives, rudders, and stabilizers from biofouling without the use of chemicals. This single transducer system is suitable for vessels up to 20 feet in length and can be combined with additional units for larger boats. The system emits high-frequency ultrasonic waves that create a microscopic resonance barrier, effectively repelling organisms before they attach. Installation is straightforward, with no through-hull fittings required; the transducer attaches directly to the hull surface using the included epoxy kit, and the control module connects easily to your boat’s existing 12V or 24V DC power source. Once installed, the system operates automatically, providing a maintenance-free antifouling solution that enhances your boat’s performance and longevity.

The package includes a control module with a built-in power cable, a submersible ultrasonic transducer with 15 feet of cable, an epoxy kit for mounting, and an easy-to-follow manual. The transducer delivers a multi-frequency ultrasonic sweep (20kHz-42kHz), ensuring optimal coverage and effectiveness. Its low power consumption of approximately 0.25 amps makes it efficient for continuous operation. The ultrasonic waves are safe for marine life and humans, operating outside the hearing range of marine mammals and avoiding the use of harmful chemicals, making it an eco-friendly option compliant with strict environmental regulations.

Using ultrasonic technology, the system targets the root cause of biofouling by disrupting the attachment process at a microscopic level, resulting in a cleaner hull that reduces drag and improves fuel efficiency. This not only maximizes your boat’s speed and performance but also significantly extends the lifespan of bottom paint and reduces maintenance costs. The ultrasonic waves penetrate complex parts like stern drives, sea strainers, and rudders, areas that are difficult to protect with paint or manual cleaning. Once installed, the system requires no scheduled maintenance, providing a reliable, hassle-free antifouling solution that helps you enjoy worry-free boating for years to come.

Features:

• Suitable for vessels up to 20 feet in length or expandable with additional units for larger vessels

• Easy installation with direct hull attachment using included epoxy; no through-hull fittings required

• Operates on 12V or 24V DC power with low power draw of 0.25 amps

• Multi-frequency ultrasonic sweep (20kHz-42kHz) for comprehensive antifouling protection

• Eco-friendly, chemical-free technology safe for marine life and environmentally compliant

• Automatic operation with no scheduled maintenance necessary

• Effective against biofouling on hulls, drives, rudders, and stabilizers

• Includes control module, ultrasonic transducer with 15ft cable, epoxy kit, and manual