Garmin GT30-TH Stainless Steel Thru-Hull DownV/SideV Scanning Transducer with Temperature for Hull Deadrises Less Than 5 Degrees

Garmin GT30-TH - Stainless Steel Thru-hull DownV/SideV 500W (CHIRP 455/800 kHz) Scanning Transducer with Temp, for Hull Deadrises Less Than 5 (12-pin)

Get ultra-clear sonar pictures of objects, structure and fish that pass below and to the side of your boat with this 12-pin thru-hull transducer with stainless steel stem.

This transducer with built-in fast response temperature sensor has a power rating of 500 W per element (1,500 W total); a depth of 750 ft (DownV) and 500 ft left and right (SideV) an operating frequency of CHIRP 455/800 kHz; for hull deadrises less than 5 degrees. Pair it with your GCV 10 scanning sonar module.

Includes transducer with stainless steel stem, fairing block, isolation plate and bushings, extension cable, mounting hardware and installation instructions. Follow the instructions carefully to avoid damaging your boat.

Compatible Devices:

• GCV 10 Scanning Sonar Module

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

The Garmin GT30-TH is a high-performance stainless steel thru-hull transducer designed for optimal sonar imaging beneath and around your boat. Compatible with the GCV 10 scanning sonar module, this transducer provides ultra-clear images of fish, structures, and objects passing below and to the sides of your vessel, enhancing your underwater awareness. Its durable stainless steel stem ensures longevity and resistance to marine environments, making it suitable for boats with hull deadrises less than 5 degrees.

This transducer features a built-in fast response temperature sensor, allowing you to monitor water temperature accurately during your trips. With a power rating of 500 W per element (totaling 1,500 W), it delivers deep and detailed sonar imaging, capable of reaching depths of up to 750 feet when used in DownV mode and 500 feet on each side in SideV mode. Operating at CHIRP 455/800 kHz frequencies, it provides high-resolution images, making it easier to identify fish and underwater structures.

The Garmin GT30-TH package includes the transducer with a stainless steel stem, a fairing block, isolation plate, bushings, an extension cable, mounting hardware, and detailed installation instructions. Proper installation following the provided guidelines is essential to prevent damage to your boat and ensure optimal performance. Its compact design and included accessories make it suitable for a range of vessel configurations, providing reliable sonar performance in demanding marine environments.Compatible with Garmin's GCV 10 scanning sonar module, this transducer is ideal for serious anglers and boaters seeking advanced underwater imaging. Its robust construction and high-resolution capabilities make it a valuable addition to any marine electronics setup, enhancing your ability to locate fish and understand underwater terrain effectively.Note: This product contains chemicals known to the State of California to cause cancer and reproductive harm. For safety information, visit P65Warnings.ca.gov.For detailed installation and usage instructions, refer to the owner’s manual available at here.

Features:

• Stainless steel stem for durability and corrosion resistance

• Compatible with Garmin GCV 10 scanning sonar module

• Ultra-clear sonar imaging of objects, structures, and fish

• CHIRP 455/800 kHz operating frequencies for high-resolution imaging

• Power rating of 500 W per element, total 1,500 W

• Depth capabilities of 750 ft (DownV) and 500 ft (SideV)

• Built-in fast response temperature sensor

• Includes fairing block, isolation plate, bushings, extension cable, and mounting hardware

• Suitable for hull deadrises less than 5 degrees