Hella Marine EuroLED 130 Surface Mount Touch Lamp - Red and White LED with White Housing

EuroLED 130 Surface Mount Touch Lamp - Red/White LED - White Housing

Advanced LED lamps with touch sensitive switching. Power saving and ultra durable. Designed and manufactured in New Zealand, EuroLED Touch lamps provide red / white light using the latest completely sealed touch sensitive technology.

Lighting control is beautifully simple. Touch the color pad for red or blue light, the white pad for white light. On the dual color versions, hold your finger on the pad for more than two seconds and the lamp will cycle through four dimming levels. Release your finger on the light level required.

Dual color EuroLED Touch lamps can also be remotely operated from multiple points with off the shelf ON/OFF/ON momentary switches. Holding one of the external switches for two seconds will synchronize the lamps to the same dimming level. Light levels are remembered by the lamps circuitry, even when a vessels batteries are turned off. The lamp will always turn on at the color intensity previously set, regardless of power interruption.

EuroLED Touch current draw is 4W on white (0.33A @ 12V) and less than 1.5W on red or blue (less than 0.125A @ 12V) to provide significant power savings. Glare diffusion without light loss is important with any LED lamp to maintain efficiency and safety, particularly with powerful lamps such as the EuroLED series. Without the protection of advanced optics, significant eye strain can result from periods of looking directly into a powerful LED point source. Advanced Hella marine lens technology provides a safe, smooth and uniform light pattern, without glare or discomfort.

The durability of EuroLED Touch lamps is outstanding. Each lamp is completely waterproof, impact and shock resistant, for an ultra long service life. Multivolt circuitry provides consistent illumination across a range of input voltages from 9-33 DC, even under severe voltage fluctuations.

Specifications:

• Lens Material: UV resistant enhanced impact acrylic


• Shroud Material: Heavy duty nylon


• Color Temperature: 5000K (White)


• Cable: Pre-wired with 2.5M of three core marine cable


• Operating Voltage: Multivolt 9-33V DC


• Power Consumption: 4.0W ( 0.33A@12V / 0.16A@24V )


• Degree of Protection: IP 6K6 6K7 - Completely Sealed


• Weight: 290g (including cable)


• Installation: Surface mount with robust bush mount


• Approvals: CE, ISO 8846 (Ignition Protection)

The Hella Marine EuroLED 130 Surface Mount Touch Lamp combines advanced LED technology with user-friendly touch controls, offering reliable illumination ideal for marine and outdoor applications. Designed and manufactured in New Zealand, this lamp features a sealed construction that ensures waterproof performance and durability in harsh environments. Its energy-efficient LEDs draw only 4 watts on white light and less than 1.5 watts on red or blue, making it an excellent choice for power-conscious installations. The white LED provides a color temperature of 5000K, delivering bright, clear illumination, while the red and blue options allow for versatile lighting needs.
Lighting control is simplified with touch-sensitive pads: tap the white pad for white light, or the color pad for red or blue light. Holding your finger on the color pad for more than two seconds cycles through four adjustable dimming levels, which can be set to your preference. For additional convenience, the lamp can be remotely operated with off-the-shelf ON/OFF/ON momentary switches, and synchronization of dimming levels across multiple units is achievable by holding an external switch for two seconds. The lamp retains its last brightness setting even after power is turned off, ensuring consistent illumination upon restart.
Constructed with UV-resistant impact acrylic lens material and a heavy-duty nylon shroud, the EuroLED 130 ensures durability and long-lasting performance. Its advanced Hella marine lens technology diffuses light evenly, eliminating glare and reducing eye strain, which is critical for powerful LED sources. The impact and shock resistant design, combined with multivolt circuitry operating across 9-33V DC, makes this lamp suitable for a wide range of marine electrical systems, even under fluctuating voltage conditions. The surface mount installation features a robust bush mount, ensuring secure attachment in demanding environments. Certified with CE and ISO 8846 ignition protection, the EuroLED 130 is an ideal lighting solution for boats, trucks, or off-grid applications that require reliable, efficient, and easy-to-control illumination.
Weighing approximately 10 ounces including the cable, this waterproof and sealed lamp is built to withstand exposure to the elements, providing long service life with minimal maintenance. Its impact-resistant construction, combined with high-quality materials such as UV-resistant acrylic and heavy-duty nylon, guarantees durability for years of trouble-free operation in demanding conditions.

Features:

• Touch-sensitive switching for easy operation of red, white, and blue lights

• Hold for dimming adjustment with four customizable levels

• Remote control compatibility with external switches for multi-point operation

• Memory function retains last brightness level after power off

• Low power consumption: 4W on white and less than 1.5W on color modes

• Advanced glare diffusion with Hella marine lens technology for safe, uniform lighting

• Impact and shock resistant design with waterproof IP 66/67 rating

• Multivolt circuitry supports input voltages from 9 to 33V DC

• Durable UV-resistant acrylic lens and heavy-duty nylon shroud for harsh environments

• Certified for marine use with CE and ISO 8846 ignition protection