Description
Impeller Kit
Material:Nitrile
Drive Type:Single Flat Drive
Number of Blades:8
Dimensions:
Diameter:1-1/4"
Shaft Width:5/16"
Shaft Diameter:15/32"
Insert Material:Brass
Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.
Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.
Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.
Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Dont use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.
Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such.
Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
The Jabsco Impeller Kit, part number 14750-0003-P, features a durable 8-blade design made from high-quality nitrile material, ensuring reliable performance in engine cooling, bilge, transfer, and general-purpose pumps. Designed with a single flat drive, this impeller offers easy installation and secure operation. The impeller's diameter measures approximately 1-1/4 inches, with a shaft width of 5/16 inches and a shaft diameter of 15/32 inches, making it compatible with various pump models. Jabsco's manufacturing process subjects these impellers to rigorous quality control, guaranteeing long-lasting efficiency and dependable operation under demanding conditions.
Replacing the impeller regularly, at least once a year or more frequently depending on engine usage, is essential to maintain optimal performance. Proper installation involves removing the end cover screws and using a dedicated impeller removal tool or channel lock pliers to grip the hub, avoiding damage to the pump face. Always grease the new impeller before installation to facilitate insertion and provide protection during initial priming. Carrying spare impellers onboard is recommended for quick replacement in emergency situations, as the impeller is a critical component of the cooling system. Following proper maintenance schedules and installation procedures can extend the lifespan of the impeller, ensuring your engine operates smoothly and efficiently.
Note that this product may expose users to chemicals such as lead, which are recognized to cause health hazards. For more information, visit P65Warnings.ca.gov. Proper handling and disposal are advised to minimize any risks associated with chemical exposure.
Features:
- Material: nitrile for durability and chemical resistance
- Drive Type: single flat drive for secure fit and easy installation
- Number of Blades: 8 blades designed for efficient fluid movement
- Compatible Dimensions: approximately 1-1/4 inch diameter, 5/16 inch shaft width, 15/32 inch shaft diameter
- Replace annually or as needed to ensure optimal engine cooling
- Easy to install using common tools, with proper greasing recommended
- Suitable for most bronze flexible impeller pumps used in marine and industrial applications
- Manufactured to strict quality standards for reliable and long-lasting performance
Details
truck_freight: |
No |
oversized: |
No |
