Description
Impeller Kit
Material:Neoprene
Drive Type:Spline Drive
Number of Blades:9
Dimensions:
-
Shaft Width:1"
-
Shaft Diameter:2-1/2"
Diameter:3-3/4"
Insert Material:Brass
Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.
Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.
Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.
Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Dont use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.
Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such.
Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
The Jabsco Impeller Kit, part number 836-0001-P, features a 9-blade design crafted from durable neoprene material, ensuring reliable performance in engine cooling, bilge, transfer, and general-purpose pumps. This impeller is designed with a spline drive and includes a brass insert for compatibility with most bronze flexible impeller pumps. Its 3-1/2-inch diameter and shaft dimensions make it suitable for a wide range of marine and industrial applications. The impeller's blades are engineered to provide efficient fluid movement, contributing to optimal engine cooling and pump operation.
Replacing the impeller regularly is essential for maintaining system efficiency and preventing potential damage. It is recommended to replace all impellers at least once a year, or sooner if the pump experiences heavy duty use. Proper installation involves removing the end cover screws and using a Jabsco Impeller Removal Tool or channel lock pliers to grip the hub—avoid using screwdrivers to prevent damage to the pump face. Always carry spare impellers onboard for emergencies, as they are critical for engine performance and safety.
Applying a light grease to the new impeller facilitates installation into the pump bore and offers added protection during initial priming. Once the gasket and end cover are replaced, the pump is ready for operation. Regular maintenance ensures long-lasting performance, and adhering to a schedule of preventative replacements helps avoid unexpected failures. This impeller kit is manufactured with rigorous quality control to ensure dependable and efficient operation throughout its service life.
Note: This product may expose you to chemicals including lead, which is known to cause health issues according to California’s Proposition 65. For more information, visit P65Warnings.ca.gov.
Features:
- Material: Neoprene for durability and flexibility
- Drive Type: Spline drive for compatibility with various pumps
- Number of Blades: 9 for efficient fluid movement
- Insert Material: Brass for secure attachment and corrosion resistance
- Dimensions: Suitable for 3-1/2 inch diameter pumps, with shaft width of 1 inch and shaft diameter of 2-1/2 inches
Details
truck_freight: |
No |
oversized: |
No |
