Marinco Wiper Motor 1000 Series - 12V, 1.5-inch Shaft, Adjustable Sweep Angle

Wiper Motor 1000 Series - 12V - 1.5" Shaft - 80

The 1000 Waterproof Wiper Motor has a fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic. It powers 18" Deluxe arm and 18" Deluxe blade combination at sweep sets of 80 degree or less or 16" Deluxe arm and 16" Deluxe blade combinations at a sweep set of 110 degree.

Features:

• Factory pre-set sweep of 80 degree or 110 degree adjustable to 50 degree, 65 degree, 80 degree or 110 degree


• 0.625" diameter shaft (16 mm)


• 12 volt heavy-duty motor with anti-rotation drive shaft


• Knurled drive shaft and solid brass arm drive nut


• Coast to park with adjustable right or left self parking


• Retail version includes 5 amp fuse and holder (on/off switch not included)


• RF shielded circuitry


• Weight: 1.75 lbs


• Available in two shaft lengths: 1.5" and 2.5" (includes .5" length of knurled arm fitting)


• Measures approximately 6.625" L x 3.375"W x 2" D


• Stall torque: 55 in-lbs (63 kgf/cm; 6.2 Nm)


• Stall current: 9.8-10.0 amps


• No load current: 0.8-1.2 amps+

The Marinco 1000 Series Wiper Motor is a durable, waterproof solution designed for reliable performance in demanding environments. Constructed with a UV stabilized, high-impact thermoplastic housing, this motor provides excellent protection against the elements, making it suitable for marine, RV, and industrial applications. Its fully sealed design ensures operation even in wet conditions, while the rugged 12V heavy-duty motor delivers consistent power with an anti-rotation drive shaft for stability. The motor features a 0.625-inch diameter shaft, compatible with various wiper arm and blade combinations, including an 18-inch Deluxe arm and blade at an 80-degree sweep or a 16-inch Deluxe set at 110 degrees, providing flexible installation options. The factory preset sweep angles are adjustable to 50, 65, 80, or 110 degrees, allowing customization to suit specific requirements.
The design incorporates a knurled drive shaft and a solid brass arm drive nut for secure operation. It offers a coast-to-park function with adjustable right or left self-parking, facilitating smooth and reliable wiper motion. The kit includes a 5 amp fuse and holder for added safety, although an on/off switch is not included. RF shielded circuitry ensures minimal interference, enhancing overall performance. Weighing approximately 1.75 pounds, this motor measures roughly 6.63 inches in length, 3.38 inches in width, and 2 inches in depth, making it compact yet powerful. Stall torque reaches 55 in-lbs, with stall current between 9.8 and 10 amps, and no-load current ranges from 0.8 to 1.2 amps, ensuring efficient operation under various loads.
Available in two shaft lengths, 1.5 inches and 2.5 inches (which includes a 0.5-inch knurled arm fitting), this motor offers versatile installation options. Its robust construction and adjustable features make it ideal for replacing or upgrading wiper systems in marine, RV, or industrial vehicles, providing reliable, waterproof operation for years to come.

Features:

• Factory preset sweep of 80 or 110 degrees, adjustable to 50, 65, 80, or 110 degrees

• 0.625-inch diameter shaft (16 mm) compatible with various wiper arms and blades

• 12-volt heavy-duty motor with anti-rotation drive shaft for stability

• Knurled drive shaft and solid brass arm drive nut for secure attachment

• Coast to park function with adjustable right or left self-parking

• Includes 5 amp fuse and holder for safety (switch not included)

• RF shielded circuitry to minimize interference

• Compact design measuring approximately 6.63 inches long by 3.38 inches wide by 2 inches deep

• Stall torque of 55 in-lbs for powerful operation

• Suitable for marine and industrial environments with waterproof, UV stabilized housing