Rule Rule-Mate 1500 GPH 12V Fully Automated Bilge Pump with Intelligent Technology

Rule-Mate 1500 GPH 12 Volt Fully Automated Bilge Pump

The Rule-Mate 1500 GPH pump consists of a powerful Rule bilge pump and a highly intelligent circuit board in a single housing. The pump activated when the water reaches 2-1/2" and automatically shuts off when the pump senses no water against the impeller, reducing the remaining water to approximately 5/8".

Rule-Mate Intelligence
Rule-Mate Bilge pumps have built-in programming that can sense when the pump is running but not pumping water. This is a very unique feature to bilge pumps because it protects the pump and the vessel, especially the vessels batteries. If debris fouls the sensor or the pump becomes air-bound, the pump will stop running and begin to "check" for water every 2-1/2 minutes. Once the debris is removed, the pump will revert to its normal operation, turning on when the water reaches 2-1/2" and shutting off at 5/8".

• 1500 GPH (6819 LPH) at 0' (13.6V)
  
  


• All-in-one pump and switch
  
  


• Extra long life heavy duty motor
  
  


• 1" NPS discharge with 1" AND 1 1/8" screw-on ports
  
  


• Three year warranty

WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

The Rule Rule-Mate 1500 GPH bilge pump offers reliable performance combined with advanced intelligent features, making it an essential component for marine safety and maintenance. Designed with a powerful heavy-duty motor, this pump efficiently handles water removal up to 1500 gallons per hour, ensuring your vessel stays dry during emergencies or routine bilge management. Its compact all-in-one design integrates the pump and switch into a single housing, simplifying installation and reducing space requirements on your boat.

Featuring Rule’s innovative intelligence system, the Rule-Mate pump automatically activates when water reaches 2-1/2 inches and shuts off at approximately 5/8 inch, providing automatic operation without manual control. The built-in programming detects if the pump runs without pumping water, which can occur if debris fouls the sensor or the pump becomes air-bound. In such situations, the pump pauses and checks for water every 2-1/2 minutes, protecting both the pump and your vessel’s battery from unnecessary wear and tear. Once the obstruction is cleared, the pump resumes normal operation, maintaining optimal bilge water levels.

Constructed with durable materials, the Rule-Mate pump includes a 1-inch NPS discharge with compatible 1-inch and 1-1/8-inch screw-on ports for flexible installation. Its heavy-duty motor is built for extended use, providing years of dependable service backed by a three-year warranty. This pump is suitable for various marine applications where automatic, reliable bilge pumping is required. Please consult the owner’s manual for detailed installation instructions and maintenance guidelines, available online at the provided link.

Note that this product contains chemicals including formaldehyde and may pose health risks according to California regulations. Proper handling and disposal are recommended to ensure safety.

Features:

• Flow rate: 1500 GPH (6819 LPH) at 13.6V

• Integrated pump and switch for simplified installation

• Heavy-duty motor designed for long-lasting performance

• Discharge size: 1 inch NPS with compatible screw-on ports (1 inch and 1 1/8 inch)

• Built-in intelligence system detects pump operation issues and pauses to prevent damage

• Automatic activation at 2-1/2 inches water level and shutoff at 5/8 inch

• Three-year manufacturer warranty