Veratron Deep-Pipe Level Sender 220mm - 90 to 4 Ohm for Fuel and Water Tanks

Deep-Pipe Level Sender - 220mm - 90 to 4 OHM

Deep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state.

Sensors are made in various lengths starting at 150 mm increasing to 1200 mm please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted.

Features:

• Tubular Sensor Stainless Steel


• Suitable for Fuel (Oi -Petroleum-Diesel-Gasoline) and Water


• Length: 220 mm

Technical Specifications:

• TE Superseal Connector 2-Pole IP67


• Operating Temp.: -25C to 65C or -13F to 149F


• Operating Voltage: 6 to 24 VDC


• Compensation chamber


• Flange: 5-Hole SAE Flange 54mm PA66 GF30


• Wiring harness with length of 200 mm


• Signal ranges: 904 OHM


• IP67 protection rating


• Communication: Analog

In the Box:

• Deep-Pipe Level Sensor


• Installation Kit


• Safety Instructions


• Installation Instructions

*Sold as an Individual

The Veratron Deep-Pipe Level Sender (Part Number: A2C1750120001) is designed for precise liquid level measurement in fuel tanks and water containers. Featuring a 220 mm length and a 38 mm diameter stainless steel tubular sensor, this device provides reliable detection of liquid levels, even in challenging sea conditions. Its float mechanism inside the tube ensures stable readings by minimizing the effects of fuel sloshing, thanks to small baffle holes at the top and bottom of the tube. This sensor is suitable for various liquids, including petrol, diesel, gasoline, and water, making it versatile for marine, industrial, and automotive applications. The sensor's robust construction and IP67 rating ensure durability and protection against water ingress, allowing for use in harsh environments. The sensor is equipped with a TE Superseal 2-Pole connector and features a 904 Ohm signal range, providing accurate analog output compatible with many control systems. Designed for easy installation, it includes a 5-hole SAE flange made of PA66 GF30, a wiring harness with a 200 mm length, and an installation kit for straightforward setup. Operating within a temperature range of -25°C to 65°C (-13°F to 149°F) and a voltage supply of 6 to 24 VDC, it offers consistent performance across various conditions. This product is sold individually and comes with detailed installation and safety instructions. Please ensure the sensor's length is at least 4 mm above the tank's base once installed for optimal measurement accuracy. For any issues or concerns, contact the manufacturer directly, as returns are not accepted at the original point of purchase.

Features:

• Tubular sensor constructed from stainless steel for durability

• Suitable for measuring fuel (petroleum, diesel, gasoline) and water levels

• 220 mm length for versatile installation

• IP67 rated for water and dust resistance

• TE Superseal 2-Pole connector for secure electrical connection

• Operating temperature range from -25°C to 65°C (-13°F to 149°F)

• Voltage supply from 6 to 24 VDC for flexible power options

• Includes a flange with a 5-hole SAE mounting pattern

• Wiring harness length of 200 mm for easy wiring

• Analog signal output with a 904 Ohm range