Veratron Deep-Pipe Level Sender 240mm for Fuel and Water Levels - Part A2C1744230001

Deep-Pipe Level Sender - 240mm - 0 to 180 OHM

Deep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state.

Sensors are made in various lengths starting at 150 mm increasing to 1200 mm please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted.

Features:

• Tubular Sensor Stainless Steel


• Suitable for Fuel (Oi -Petroleum-Diesel-Gasoline) and Water


• Length: 240 mm

Technical Specifications:

• TE Superseal Connector 2-Pole IP67


• Operating Temp.: -25C to 65C or -13F to 149F


• Operating Voltage: 6 to 24 VDC


• Compensation chamber


• Flange: 5-Hole SAE Flange 54mm PA66 GF30


• Wiring harness with length of 200 mm


• Signal ranges: 0 to 180 OHM


• IP67 protection rating


• Communication: Analog

In the Box:

• Deep-Pipe Level Sensor


• Installation Kit


• Safety Instructions


• Installation Instructions

*Sold as an Individual

The Veratron Deep-Pipe Level Sender is engineered for precision liquid level detection in fuel tanks, offering a robust stainless steel construction that withstands demanding conditions. Its 240 mm length and float design ensure accurate and stable measurements, even in turbulent environments. The sensor's design incorporates small baffles at both ends of the tube to minimize fuel sloshing effects, maintaining consistent readings during vehicle movement or sea transport. It is suitable for a wide range of liquids including petroleum products and water, making it a versatile choice for marine, automotive, and industrial applications. Easy to install with a standard 54 mm SAE flange and a waterproof TE Superseal connector, the sensor operates reliably across a broad temperature and voltage range, ensuring long-term performance and compatibility with existing systems. This sensor is sold individually and comes complete with an installation kit and safety instructions, providing everything needed for a straightforward setup.

Features:

• Tubular Sensor Stainless Steel: Durable construction suitable for harsh environments

• Suitable for Fuel and Water: Versatile for various liquid measurement needs

• Length: 240 mm: Designed for standard tank depths and installation requirements

• TE Superseal Connector 2-Pole IP67: Ensures secure and waterproof electrical connection

• Operating Temp.: -25°C to 65°C (-13°F to 149°F): Wide temperature range for different climates and conditions

• Operating Voltage: 6 to 24 VDC: Compatible with most vehicle and industrial power systems

• Compensation chamber: Maintains accuracy over temperature variations

• Flange: 5-Hole SAE Flange 54mm PA66 GF30: Standard mounting interface for easy installation

• Wiring harness: 200 mm length for flexible wiring options

• Signal range: 0 to 180 OHM: Provides precise analog level signals

• IP67 Protection Rating: Fully protected against dust and water ingress

• Communication: Analog: Compatible with standard fuel gauge systems