Description
LinkUp Analog to NMEA 2000 Gateway
The resistive-type LinkUp gateway provides an easy method to convert vessel and engine information to NMEA 2000.
Easily installed, the LinkUp Gateway replaces the original wiring, delivering power to both the LinkUp device and sensor from the NMEA 2000 backbone while still being complaint with the NMEA 2000 certification requirements.
Configuring the LinkUp Gateway is simple using a mobile device and the companion LinkUp Configuration App for Android or IOS.
Each device has a built-in passive NFC antenna, so the parameters of the sensors are wirelessly configured to type, instance and warning threshold on the mobile device which is then "tapped" against the LinkUp device for instant data download.
Features:
- User-friendly configuration through wireless interface and companion smartphone App
- Sensor Cable length - 25cm
- NMEA 2000 Cable length - 25 cm
- Tap to download parameters
- Mobile App for Android or IOS
- No power required to program
- No certification required
- Bi-directional communication, programming interface or data recovery
Supported Sensors:
- Fuel Level
- Oil/Boost Pressure
- Fresh/Waste Water Level
- Oil/Gear Oil/Coolant Temperature
- Trim Tabs
- Rudder Angle
Technical Specifications:
- Standard M12 NMEA 2000 plug
- LED Notification
- Operating Voltage - 6 - 16.5V
- Nominal Voltage - 12 V (from NMEA 2000 network)
- IPX7 Rated
- Sensor Plug - Superseal Female 2 Pin
- Counterpart Sensor Plug - - Superseal Male 2 Pin
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.The Veratron LinkUp Model B00042201 is a resistive-type gateway designed to seamlessly convert vessel and engine sensor data into NMEA 2000 format. This device simplifies integration by replacing the original wiring, allowing power and data transfer through the NMEA 2000 backbone while maintaining compliance with NMEA 2000 certification standards. Installation is straightforward, and configuration is effortless via a mobile device using the dedicated LinkUp Configuration App for Android and iOS, enabling quick setup and adjustments. Its built-in passive NFC antenna facilitates wireless parameter configuration by simply tapping the device with a mobile phone, which instantly downloads sensor settings such as type, instance, and warning thresholds. This makes setup and calibration efficient and user-friendly without requiring external power for programming or additional certification processes.
Features:
- User-friendly configuration through wireless interface and companion smartphone app
- Sensor cable length of 10 inches (25 cm)
- NMEA 2000 cable length of 10 inches (25 cm)
- Tap to download sensor parameters wirelessly
- Compatible with Android and iOS devices
- No external power required for device programming
- No certification necessary for operation
- Supports bi-directional communication, programming, and data recovery
Details
truck_freight: |
No |
oversized: |
No |
owners_manual_url: |
https://productimageserver.com/literature/ownersManual/87401OM.pdf |
