Victron Energy Blue Smart IP65 Battery Charger - 6V/12V, 1.1A, Bluetooth-Enabled

Blue Smart IP65 Charger - 6V/12V - 1.1A - 120V - 1-15P

The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in the workshop and motor vehicles, such as (classic) cars; motorbikes; boats, and camper vans.

The battery is charged, smartly... to the perfect condition

The seven-step charging algorithm gets the best out of a battery. The charger gives the battery the power it needs, maintains its health, and ensures better performance... and longer life.

Recovery of deeply-discharged 'dead' batteries

Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Regular charging will then be resumed as soon as sufficient voltage is across the battery terminals.

Connect the battery with ease

The charger comes with both crocodile clips and M8 eyelets - making it easy to connect to the battery. If users wish, it can be left permanently connected.

Check the status of your battery remotely

The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet, or laptop. All settings of the charger can be configured with the VictronConnect app.

Specifications:

• Input Voltage Frequency Range: 100 - 250VAC | 45 - 65Hz


• Efficiency: 82%


• Standby Power Consumption: <0,5 W


• Minimum Battery Voltage: Starts charging from down to 0 V


• Charge voltage 'absorption': Normal: 7,2 V | 14,4 V / High: 7,35 V | 14,7 V / Li-ion: 7,1 V | 14,2 V


• Charge Voltage 'float': Normal: 6,9 V | 13,8 V / High: 6,9 V | 13,8 V / Li-ion: Disabled


• Charge Voltage 'storage': Normal: 6,6 V | 13,2 V / High: 6,6 V | 13,2 V / Li-ion: 6,75 V | 13,5 V


• Charge Current: 1.1 A


• Low-Current Mode: 0,5A


• Temperature Compensation (lead-acid batteries only): 8 mV/C | 16 mV/C


• Power Supply Mode: Yes


• Back Current Drain: 0,1 Ah/month (140uA)


• Protection: Reverse polarity, Output short circuit, Over-temperature


• Operating Temp. Range: -30 to +50C (full rated output up to 30C)


• Humidity (non-condensing): Max 95%


• Charge Algorithm: 7-stage adaptive


• Bluetooth: 4dBm, 24022480 MHz

Enclosure Specifications:

• Battery-Connection: Black and red cable of 1,5 meter


• 230V AC connection: 1.5m cable with CEE 7/16 or AS/NZS 3112 plug


• Protection Category: IP65 (splash and dust proof)


• Weight: 0,4 kg


• Dimensions: 38 x 64 x 153 mm

Standards:

• Safety: EN 60335-1, EN 60335-2-29


• Emission; EN 55014-1, EN 61000-6-3, EN 61000-3-2


• Immunity: EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3

The Victron Energy Blue Smart IP65 Charger combines advanced battery management with user-friendly features, making it ideal for both workshop and vehicle applications. Designed for versatile use with classic cars, motorcycles, boats, and camper vans, this charger ensures your batteries are maintained in optimal condition with its innovative seven-step charging algorithm. This process maximizes battery life, performance, and reliability by providing the precise amount of power needed during each stage of charging. Its smart recovery feature can revive deeply-discharged batteries by gently recharging them, which sets it apart from many conventional chargers. The ability to recharge 'dead' batteries extends the lifespan of your power sources and reduces the need for replacements, saving time and money in the long run. The charger is equipped with both crocodile clips and M8 eyelets, facilitating quick and secure connections, whether temporary or permanent. Its IP65 enclosure offers splash and dust-proof protection, making it suitable for challenging environments. The Bluetooth connectivity allows you to remotely monitor and configure the charging process via the VictronConnect app on your smartphone, tablet, or laptop, providing real-time updates on battery status and charging parameters. The charger supports a wide input voltage range of 100-250VAC, ensuring compatibility in various regions. With an efficiency rate of 82% and low standby power consumption, the Blue Smart IP65 is both energy-efficient and environmentally friendly. Its comprehensive safety features include reverse polarity, output short circuit, and over-temperature protection, ensuring safe operation under diverse conditions. Compact and lightweight, this charger is easy to install and leave connected permanently if desired, making it a reliable choice for maintaining your batteries over the long term. Whether you need to revive a deeply-discharged battery or maintain a healthy charge, the Victron Energy Blue Smart IP65 Charger offers a professional-grade solution with smart technology and robust construction for peace of mind and optimal battery performance.

Features:

• Seven-stage adaptive charging algorithm optimizes battery health and longevity

• Bluetooth connectivity for remote monitoring and configuration via VictronConnect app

• Recovery mode for recharging deeply-discharged or 'dead' batteries

• Easy connection options with crocodile clips and M8 eyelets for secure attachment

• IP65 rated enclosure provides splash and dust-proof protection

• Wide input voltage range (100-250VAC) suitable for various regions

• Built-in safety features including reverse polarity, short circuit, and over-temperature protection

• Low standby power consumption at less than 0.5W for energy efficiency

• Compact design with lightweight construction for easy installation

• Supports both 6V and 12V lead-acid and Li-ion batteries, with configurable voltage settings