Victron Energy BlueSmart IP65 Charger 12/25 with Bluetooth and 120V NEMA 1-15P

BlueSmart IP65 Charger 12/25 (1) 120V NEMA 1-15P UL Approved

The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in the workshop and on motor vehicles, such as classic cars, motorbikes, boats, and campervans.

The Battery Is Charged, Smartly... To Perfect Condition

The seven-step charging algorithm gets the most out of a battery. The charger gives the battery the power it needs, maintains its health, ensures better performance... and gives it a longer life.

Recovery of Deeply-Discharged Dead Batteries

Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.

Connect the Battery with Ease

The charger comes with both crocodile clips and M8 eyelets, making it easy to connect to the battery. If users wish, they can leave it permanently connected.

Check the Status of the Battery Remotely

The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet, or laptop. All settings of the charger can be configured with the VictronConnect app.

Specifications:

• Input Voltage: 120 VAC


• Efficiency: 94%


• Standby Power Consumption: 0.5W


• Minimum Battery Voltage: Starts charging from down to 0V


• Charge Voltage 'Absorption': Normal: 14.4V High: 14.7V Li-ion: 12.4V


• Charge Voltage 'Float': Normal: 13.8V High: 13.8V Li-ion: 13.5V


• Charge Voltage 'Storage': Normal: 13.2V High: 13.2V Li-ion: 13.5V


• Charge Current: 25A


• Temperature Compensation (Lead-Acid Batteries Only): 16 mV/degrees C (18mV/degrees F


• Can Be Used as Power Supply: Yes


• Back Curreny Drain: 0.7Ah/month (1mA)


• Protection: Reverse polarity; Output short circuit; Over temperature


• Operating Temp. Range: -40 to +60 degrees C (full rated output up to 30 degrees C) -40 to +140 degrees F (full rated output up to 90 degrees F)


• Humidity (non-condensing): Max 95%

Enclosure Specifications:

• Battery-Connection: Black and red cable of 1.5 meters (4.9 feet)


• 120 V Ac-Connection: Cable of 1.8 meters (5.9 feet) with US NEMA 1-15 plug


• Protection Category: IP65 (splash and dust proof, and ignition protected)


• Weight: 0,9kg (2lbs)


• Dimensions (H x W x D): 12/25: 60 x 105 x190mm 2.3 x 4.1x 7.5 inches

Standards:

• Safety: UL 1236, CSA C22.2, EN 60335-1, 60335-2-29


• Emission: EN 55014-1, EN 61000-6-3, EN 61000-3-2


• Immunity: EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3

The Victron Energy BlueSmart IP65 Charger 12/25 is a professional-grade battery charger designed for versatile use in workshops, on motor vehicles, and for marine applications. Featuring a built-in Bluetooth connection, this charger allows remote monitoring and configuration via the VictronConnect app on smartphones, tablets, or laptops. Its IP65-rated enclosure ensures protection against dust and water splashes, making it suitable for demanding environments. The charger’s seven-step charging algorithm optimizes battery health, extending lifespan and enhancing performance by providing precise current and voltage regulation during each phase of charging.

Equipped to recover deeply discharged batteries, the BlueSmart IP65 employs a low-current recovery mode before normal charging resumes. This feature helps revive batteries that are otherwise considered dead, saving users time and money. The charger offers flexible connection options with crocodile clips or M8 eyelets, allowing for quick attachment or permanent setup. Its user-friendly design ensures straightforward installation and maintenance, whether in a workshop or on a vehicle.

Operationally, the BlueSmart IP65 supports various battery chemistries, including lead-acid and lithium-ion, with configurable voltage settings to suit different needs. It provides efficient power conversion with a 94% efficiency rating and consumes minimal standby power. Safety features include reverse polarity protection, output short circuit prevention, and over-temperature shutdown. Its robust construction can operate across a broad temperature range, from -40°F to +140°F, ensuring reliable performance in extreme conditions. This charger is a reliable solution for maintaining, recovering, and powering batteries in diverse applications, backed by compliance with safety and emission standards.

Features:

• Bluetooth connectivity for remote monitoring and control via VictronConnect app

• IP65-rated enclosure for dust and water splash protection

• Seven-step charging algorithm for optimal battery health and longevity

• Deep discharge recovery mode to recondition dead batteries

• Multiple connection options with crocodile clips and M8 eyelets

• Supports lead-acid and lithium-ion batteries with configurable voltage settings

• High efficiency at 94% with low standby power consumption

• Safety features including reverse polarity, short circuit, and over-temperature protection

• Wide operating temperature range from -40°F to +140°F

• Compact design with easy installation and maintenance