Victron Energy Venus GX Control - No Display for Power System Monitoring and Control

Venus GX Control - No Display

Features:

• Venus GX The Venus GX provides intuitive control and monitoring for all Victron power systems. The list of Victron products that can be connected is endless: Inverters, Multis, Quattros, MPPT solar chargers, BMV battery monitors, Lynx Ion + Shunt and more.


• VRM Online Portal All readings are forwarded to our free remote monitoring website: the VRM Online Portal. To get an impression, try the demo on https://vrm.victronenergy.com. See also the screenshots below.


• Remote Console on VRM The way to access the device for setting up, as well as monitoring, is via Remote Console. Either via VRM, via the built-in WiFi Access Point, or on the local LAN/WiFi network.


• Automatic genset start/stop A highly customizable start/stop system. Use state of charge, voltage, load and other parameters. Define a special set of rules for quiet times, and optionally a monthly test run.


• Data logging When connected to the internet, all data is sent to the VRM Portal. When there is no internet connection available, the Venus GX will store the data internally, up to 48 hours. By inserting a micro SD-card or USB stick, more data can be stored. These files can then be uploaded to the VRM Portal, or offline converted with the VictronConnect app, for analysis.


• Supported products - Multis and Quattros, including split-phase and three-phase systems. Monitoring and control (on/off and current limiter). Changing configuration is possible (only remotely via the internet, not without an internet connection). - EasySolar 1600VA - BlueSolar MPPT Solar Chargers with a VE.Direct port. - BlueSolar MPPT 150/70 and the MPPT 150/85 with VE.Can port. - SmartSolar MPPT 150/70 and the MPPT 150/100 with VE.Can port. When multiple BlueSolar MPPTs or SmartSolar MPPTs with VE.Can are used in parallel, all the information is combined as one. See also our blog-post about synchronizing multiple MPPT 150/70 solar chargers. - BMV-700 family can be connected directly to the VE.Direct ports on the Venus GX. Use the VE.Direct Cable for this. - BMV-600 family can be connected to the VE.Direct ports on the Venus GX. Requires an accessory cable. - Lynx Ion + Shunt - Lynx Ion BMS - Lynx Shunt VE.Can - Skylla-i battery chargers - NMEA2000 tank sensors - A USB GPS can be connected to the USB port. The data is sent to the VRM Portal for tracking purposes. The map on VRM will show the latest position. - Fronius PV Inverters When more than two VE.Direct products must be connected, USB can be used.

Warranty Info

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

The Victron Energy Venus GX Control (Part No. BPP900400100) offers comprehensive management and monitoring for a wide range of Victron power systems without the need for an integrated display. This device provides seamless integration with inverters, MultiPlus, Quattro, MPPT solar chargers, battery monitors, and more, enabling users to optimize system performance through intuitive remote access. Its versatile connectivity options, including WiFi, LAN, and USB, facilitate easy setup and real-time data access via the VRM Online Portal, which supports remote monitoring and control from anywhere. This ensures users can keep track of energy production, consumption, and system status with ease, making it ideal for off-grid, marine, and mobile applications.
The Venus GX features automatic generator start/stop capabilities based on parameters such as state of charge, voltage, and load, allowing for highly customizable operation schedules. Users can define rules for quiet hours or monthly testing, enhancing system efficiency and reducing operational noise. When connected to the internet, all data is logged and stored securely on the VRM Portal, with local storage options available via micro SD or USB drives for offline data management. This robust data logging ensures continuous monitoring even during internet outages, and the stored data can be easily uploaded or analyzed offline using VictronConnect.
Compatibility with a broad array of products such as BlueSolar and SmartSolar MPPT chargers, Lynx Ion + Shunt, BMV battery monitors, Skylla-i chargers, and NMEA2000 sensors makes the Venus GX a versatile hub for complex power systems. Its remote configuration and monitoring capabilities extend to adjusting system settings, controlling power outputs, and managing multiple devices simultaneously. This flexibility makes it suitable for large-scale installations with split-phase or three-phase systems, as well as smaller off-grid setups. The device's design without an integrated display simplifies installation and reduces maintenance, while still providing all necessary functionality through remote interfaces.
For detailed setup instructions, warranty information, and safety warnings, please refer to the official resources available online. The Venus GX Control is a reliable and essential component for anyone seeking a centralized, remotely accessible control unit to maximize their energy system's performance and lifespan.

Features:

• Intuitive control and monitoring for Victron power systems including inverters, MultiPlus, and MPPT chargers

• Remote access via VRM Online Portal, WiFi, LAN, and USB for real-time data and system management

• Automatic generator start/stop based on customizable parameters such as load, voltage, and state of charge

• Advanced data logging with local storage options for offline analysis and seamless data upload

• Wide compatibility with Victron products including battery monitors, Lynx systems, NMEA2000 sensors, and PV inverters