Xanigo Marine Mold & Mildew Stain Remover - 32oz for Boats and Marine Surfaces

Mold Mildew Stain Remover - 32oz

Say goodbye to stubborn mold and mildew stains with Xanigo Marines Mold Mildew Stain Remover! This powerful formula is easy to use and is the perfect solution for removing mold and mildew stains from boat tops, vinyl cushions, chairs, canopies, and more. Its versatile formula can also be used on rubber fenders, fiberglass, caulk, tile, grout, shower stalls, sinks, counters, and other surfaces that may be prone to mold and mildew.

Simply spray the product onto a cool substrate, let it soak for a few minutes, and watch the mold and mildew disappear. To ensure the best results, avoid using it in direct sunlight.

After removing it, make sure to PREVENT the mold from coming back with Xanigo Marines Mold Mildew Preventer.

Specifications:

• Bottle Size: 32 ounces

STEP 1: Remove Mold Mildew with Xanigo Marine's Mold Mildew Stain Remover

Xanigo Marins Mold Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.

STEP 2: Neutralize the Remover

After rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.

STEP 3: Prevent Mold Mildew with Xanigo Marine's Mold Mildew Preventer

With just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.

Spray the Mold Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.

STEP 4: Maintain Seats with Xanigo Marine's Waterless Wash

Keep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold mildew preventer.

Also, a great way to shine up a gel coat quickly!

The Xanigo Marine Mold & Mildew Stain Remover is a powerful 32-ounce solution designed specifically for marine environments. It effectively eliminates stubborn mold and mildew stains from boat tops, vinyl cushions, seats, canopies, and other surfaces prone to moisture buildup. Its versatile formula can also be used on rubber fenders, fiberglass, caulk, tile, grout, shower stalls, sinks, and counters, making it an essential product for maintaining a clean and healthy marine environment. The product is easy to apply: simply spray onto a cool surface, allow it to soak for a few minutes, and then rinse thoroughly. For best results, avoid direct sunlight during application to prevent premature drying and ensure maximum stain removal. After removal, it’s recommended to use Xanigo Marine’s Mold & Mildew Preventer to protect surfaces from future growth, providing up to 90 days of mold resistance with a single application. The process involves applying the remover, letting it sit for 60-90 seconds, agitating with a brush if needed, and thoroughly rinsing with clean water. Once the surface is clean, neutralize residual chemicals with Xanigo Marine Waterless Wash, which also helps maintain the integrity of vinyl and stitching. The Mold & Mildew Preventer bonds covalently with the surface, creating a protective barrier that repels mold and mildew. To maintain a fresh, mold-free environment, regularly spray Waterless Wash on boat surfaces, which also enhances shine on gel coat and removes sunscreen, a common mold food source. This comprehensive approach ensures that marine surfaces stay clean, protected, and visually appealing, prolonging the lifespan of your boat’s materials and providing peace of mind during your boating adventures.

Features:

• Powerful formula effectively removes mold and mildew stains from a variety of marine surfaces

• Versatile application suitable for boat tops, vinyl cushions, fiberglass, tile, grout, and more

• Easy to use: spray, soak, agitate, and rinse for quick stain removal

• Neutralizes residual chemicals to protect vinyl and stitching after cleaning

• Creates a covalent bond with surfaces to provide up to 90 days of mold and mildew protection

• Includes a Waterless Wash for ongoing maintenance and surface shine

• Prevents mold regrowth by applying a protective barrier on clean surfaces

• Safe for use on multiple materials including rubber fenders, canopies, and patio furniture