Veratron Deep-Pipe Level Sender 270mm for Fuel and Water Tanks - Part A2C1744260001

Deep-Pipe Level Sender - 270mm - 0 to 180 OHM

Deep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state.

Sensors are made in various lengths starting at 150 mm increasing to 1200 mm please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted.

Features:

• Tubular Sensor Stainless Steel


• Suitable for Fuel (Oi -Petroleum-Diesel-Gasoline) and Water


• Length: 270 mm

Technical Specifications:

• TE Superseal Connector 2-Pole IP67


• Operating Temp.: -25C to 65C or -13F to 149F


• Operating Voltage: 6 to 24 VDC


• Compensation chamber


• Flange: 5-Hole SAE Flange 54mm PA66 GF30


• Wiring harness with length of 200 mm


• Signal ranges: 0 to 180 OHM


• IP67 protection rating


• Communication: Analog

In the Box:

• Deep-Pipe Level Sensor


• Installation Kit


• Safety Instructions


• Installation Instructions

*Sold as an Individual

The Veratron Deep-Pipe Level Sender model A2C1744260001 is designed for accurate liquid level measurement in fuel tanks and water reservoirs. Featuring a 270 mm stainless steel tubular sensor, this device incorporates a float mechanism inside a vertical tube, providing reliable readings regardless of tank movement. Its robust construction and IP67 protection rating ensure durability in harsh environments, making it suitable for various applications including petroleum, diesel, gasoline, and water tanks. The sensor's design includes small holes at the top and bottom of the tube to minimize fuel sloshing effects, helping maintain stable float positions during sea conditions or vehicle movement. Installation requires ensuring the sensor length exceeds the tank depth by at least 4 mm for optimal performance, with models available from 150 mm up to 1200 mm to accommodate different tank sizes. The device connects via a TE Superseal 2-Pole IP67 connector and operates within a voltage range of 6 to 24 VDC, providing an analog signal output from 0 to 180 ohms, corresponding to liquid levels. Its flange utilizes a 5-hole SAE pattern with a 54 mm PA66 GF30 material, ensuring secure mounting. The included wiring harness measures 200 mm, facilitating straightforward installation. This sensor is compatible with various liquids, including petroleum products and water, making it versatile for industrial or marine use. The package includes the level sensor, installation kit, safety instructions, and detailed installation guidance, ensuring proper setup and operation. As a single-unit sale, it offers a reliable solution for monitoring liquid levels in a range of tank configurations, supporting efficient fluid management and system automation.

Features:

• Tubular sensor made of stainless steel for durability

• Suitable for measuring fuel (oil, petroleum, diesel, gasoline) and water

• Includes a float inside a 270 mm vertical tube for accurate level detection

• Small holes at the top and bottom act as a baffle to reduce fuel sloshing

• Operates with a TE Superseal 2-Pole IP67 connector and analog signal output

• Voltage range of 6 to 24 VDC for flexible power supply

• IP67 rated for protection against dust and water ingress

• Compatible with 5-hole SAE flange (54 mm) made of PA66 GF30

• Wiring harness length of 200 mm for easy installation

• Designed for liquid levels from 0 to 180 ohms for precise measurement