Veratron Deep-Pipe Level Sender 600mm for Fuel and Water Tanks, Part A2C1720100001

Deep-Pipe Level Sender - 600mm - 0 to 180 OHM

Deep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state.

Sensors are made in various lengths starting at 150 mm increasing to 1200 mm please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted.

Features:

• Tubular Sensor Stainless Steel


• Suitable for Fuel (Oi -Petroleum-Diesel-Gasoline) and Water


• Length: 600 mm

Technical Specifications:

• TE Superseal Connector 2-Pole IP67


• Operating Temp.: -25C to 65C or -13F to 149F


• Operating Voltage: 6 to 24 VDC


• Compensation chamber


• Flange: 5-Hole SAE Flange 54mm PA66 GF30


• Wiring harness with length of 200 mm


• Signal ranges: 0 to 180 OHM


• IP67 protection rating


• Communication: Analog

In the Box:

• Deep-Pipe Level Sensor


• Installation Kit


• Safety Instructions


• Installation Instructions

*Sold as an Individual

The Veratron Deep-Pipe Level Sender model A2C1720100001 is designed for precise liquid level measurement in fuel tanks, including petroleum, diesel, gasoline, and water. Its 600mm stainless steel tubular sensor features a float mechanism that accurately detects liquid levels, providing reliable readings even during vehicle movement. The sensor's robust construction ensures durability in harsh environments, making it ideal for marine, industrial, and automotive applications. Its design incorporates small holes at the top and bottom of the tube, acting as baffles to prevent fuel sloshing effects and maintain stable float positioning regardless of sea or terrain conditions. This stability ensures consistent and accurate level readings, crucial for safe and efficient tank management. The sensor's compatibility with both liquid types and its IP67 protection rating make it suitable for a wide range of operational environments. It connects via a TE Superseal 2-Pole IP67 connector, supporting an operating voltage of 6 to 24 VDC, and provides an analog signal range of 0 to 180 ohms, corresponding to liquid levels. The sensor features a 5-hole SAE flange made of PA66 GF30, facilitating straightforward installation onto standard tanks. The included wiring harness measures 8 inches, providing flexible installation options. Suitable for tanks where the sensor's length is at least 4mm shorter than the tank's depth, this device ensures accurate level detection without interference or sloshing issues. Packaged with an installation kit and comprehensive safety and installation instructions, the Veratron Deep-Pipe Level Sender is an essential component for reliable liquid measurement in demanding environments. Sold individually, this sensor offers robust performance and precise measurement capabilities to support operational safety and efficiency. For any technical concerns or support, contact the manufacturer directly, as returns are not accepted at the point of purchase.

Features:

• Tubular sensor made of stainless steel for durability

• Suitable for measuring fuel (oil, petroleum, diesel, gasoline) and water

• 600mm length for versatile tank applications

• Baffle holes at top and bottom to prevent fuel sloshing

• Supports an operating temperature range from -25°C to 65°C (-13°F to 149°F)

• Uses a TE Superseal 2-Pole IP67 connector for secure wiring

• Provides an analog signal range of 0 to 180 ohms for level detection

• Includes a 5-hole SAE flange for easy installation

• Wiring harness length of 8 inches for flexible setup

• Designed to be installed with at least 4mm clearance from tank base