Victron Energy Phoenix Inverter 12/250 - 120V with VE.Direct NEMA 5-15R Outlet and 200W Power

Phoenix Inverter 12/250 - 120V - VE.Direct NEMA 5-15R - Single Outlet - 200W

Inverters allow users to power domestic equipment - requiring 230V/120V AC - using 'leisure' or 'automotive' batteries rated at 12V, 24V or 48V DC.

*This inverter has a NEMA 5-15R outlet.

E.Direct Communication Port

The VE.Direct port can be connected to:

• A computer (VE.Direct to USB interface cable needed)


• Apple and Android smartphones, tablets, MacBook, and other devices


• (VE.Direct Bluetooth Smart dongle needed)

Fully Configurable:

• Low battery voltage alarm trip and reset levels


• Low battery voltage cut-off and restart levels


• Dynamic cut-off: load-dependent cut-off level


• Output voltage 210 - 245V


• Frequency 50 Hz or 60 Hz


• ECO mode on/off and ECO mode sense level

Monitoring:

• In- and output voltage, % load, and alarms

Proven Reliability

The full bridge plus toroidal transformer topology has proven its reliability over many years.

The inverters are short-circuit proof and protected against overheating, whether due to overload or high ambient temperature.

High Start-Up Power

Needed to start loads such as power converters for LED lamps, halogen lamps, or electric tools.

ECO Mode

When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once on standby, the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.

Remote On/Off

A remote on/off switch can be connected to a two-pole connector, or between battery plus and the left-hand contact of the two-pole connector.

LED Diagnosis

Please see the manual for a description.

To Transfer the Load to Another AC Source: The Automatic Transfer Switch

For Victrons low-power inverters, they recommend the Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption.

Inverter Specifications:

• Cont. Power at 25 degrees C: (1) 250VA


• Cont. Power at 25 degrees C / 40 degrees C: 200 / 175W


• Peak Power: 400W


• Output AC Voltage / Frequency (adjustable): 230VAC or 120VAC +/- 3% 50Hz or 60Hz +/- 0,1%


• Input Voltage Range: 9,2 - 17 / 18,4 - 34,0 / 36,8 - 62,0V


• DC Low Shut Down (adjustable): 9,3 / 18,6 / 37,2V


• Dynamic (load dependent) DC Low Shut Down (fully configurable): Dynamic cut-off, see https://www.victronenergy.com/live/ve.direct:phoenix-inverters-dynamic-cutoff


• DC Low Restart Alarm (adjustable): 10,9 / 21,8 / 43,6V


• Battery Charged Detect (adjustable): 14,0 / 28,0 / 56,0V


• Max. Efficiency: 87 / 88 / 88%


• Zero-Load Power: 4,2 / 5,2 / 7,9W


• Default Zero-Load Power in ECO Mode (default retry interval: 2,5 s, adjustable): 0,8 / 1,3 / 2,5W


• ECO Mode Stop Start Power Setting: Adjustable


• Protection (2): a - f


• Operating Temperature Range -40 to +65 degrees C (fan-assisted cooling)

Enclosure Specifications:

• Material Color: Steel chassis and plastic cover (blue Ral 5012)


• Battery-Connection: Screw terminals


• Maximum Cable Cross-Section: 10mm / AWG8


• Standard AC Outlets: 230V: Schuko (CEE 7/4), IEC-320 (male plug included); UK (BS 1363), AU/NZ (AS/NZS 3112); 120V: Nema 5-15R, GFCI


• Protection Category: IP 21


• Weight: 2,4kg / 5,3lbs


• Dimensions (H x W x D, mm); (H x W x D, inch): 86 x 165 x 260; 3.4 x 6.5 x 10.2

Accessories:

• Remote On-off: Yes


• Automatic Transfer Switch: Filax

Standards:

• Safety: EN-IEC 60335-1 / EN-IEC 62109-1 / UL 458 (3)


• EMC: EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3


• Automotive Directive ECE R10-4: 1) Nonlinear load, crest factor 3:1; 2) Protection key: a) output short circuit b) overload c) battery voltage too high d) battery voltage too low e) temperature too high f) DC ripple too high

Please contact your dealer for any returns, repairs or support issues related to this product.

The Victron Energy Phoenix Inverter 12/250 provides reliable power conversion from 12V DC to 120V AC, ideal for powering domestic appliances in off-grid or mobile setups. With a continuous power rating of 200W and a peak power capacity of 400W, this inverter is suitable for running LED lamps, small tools, and other essential devices. Its proven full bridge and toroidal transformer topology ensures durability and consistent performance, offering short-circuit protection and overheating safeguards for dependable operation in demanding environments. The inverter features an NEMA 5-15R outlet, compatible with standard North American electrical devices, making it versatile for various applications.

The VE.Direct communication port enables seamless integration with computers, smartphones, and tablets through optional USB or Bluetooth Smart dongles, allowing users to monitor voltage, load, and alarms remotely. Fully configurable, the inverter allows users to set low battery voltage alarms and cut-off levels, adjust output voltage within 210-245V, and select frequency between 50Hz or 60Hz. Dynamic load-dependent cut-off and adjustable restart levels enhance safety and system longevity, making it adaptable to different battery voltages and load conditions. The inverter supports ECO mode, which reduces power consumption by switching to standby when the load drops below 15W, with an adjustable ON/OFF cycle to optimize efficiency. An optional remote on/off switch provides convenient control from a distance, while the built-in LED diagnostics facilitate quick troubleshooting. To ensure continuous operation during power interruptions, the Victron Phoenix Inverter can be paired with the Filax Automatic Transfer Switch, offering a rapid switchover time of less than 20 milliseconds to prevent disruption of sensitive electronic equipment. Its robust steel enclosure and plastic cover are rated IP21 for protection against dust and splashes, and the unit is designed to operate reliably across a temperature range from -40°C to +65°C. With screw terminals for battery connection and compatible with cables up to 10mm², installation is straightforward. This inverter complies with international safety and EMC standards, ensuring safe and compliant operation in various environments. Whether used in RVs, boats, or off-grid solar systems, the Victron Energy Phoenix Inverter 12/250 offers a compact, efficient, and adaptable power solution backed by years of proven reliability and advanced features for modern energy management.

Features:

• Power Output: 200W continuous, 400W peak for reliable operation of small appliances

• Input Voltage Range: 9.2V to 17V, 18.4V to 34V, 36.8V to 62V for flexible battery compatibility

• Output Voltage and Frequency: Adjustable between 210-245V with options for 50Hz or 60Hz

• VE.Direct Communication: Enables remote monitoring and configuration via USB or Bluetooth Smart dongle

• Fully Configurable Settings: Low battery alarms, cut-off levels, dynamic load-dependent cut-off, and ECO mode controls

• Built-In Protections: Short-circuit, overheating, overload, and high/low battery voltage safeguards

• ECO Mode: Reduces power consumption by switching to standby below 15W load, with adjustable cycle

• Remote On/Off: Convenient control with optional remote switch connection

• Durable Enclosure: Steel chassis with IP21 protection, rated for operation in extreme temperatures

• Compatibility: Supports various AC outlets including NEMA 5-15R, Schuko, IEC-320, UK, AU/NZ, with screw terminal battery connection