ACCESSORIES

VE Direct Cable - 10MThe VE.Direct cable is available in different lengths. There is a straight and 90 degree angle model. The Victron Energy VE Direct Cable - 10 meters provides a dependable connection solution for your energy management systems...

VE Direct Cable - 0.3MThe VE.Direct cable is available in different lengths. There is a straight and 90 degree angle model. The Victron Energy VE Direct Cable – 0.3 meters provides a secure and reliable connection for your Victron systems, ensuring...

GX Touch 50 Wall MountThe GX Touch wall mount accessory allows easy mounting of the GX Touch on a solid wall. No drilling or cut-out is required, other than the three screws that fix the wall mount onto the wall.Please contact your dealer for any...

GX Touch 70 Wall MountThe GX Touch wall mount accessory allows easy mounting of the GX Touch on a solid wall. No drilling or cut-out is required, other than the three screws that fix the wall mount onto the wall.Please contact your dealer for any...

GX Touch 50 Adapter for CCGX Cut-OutThis adapter is designed to easily replace the CCGX display with the newer GX Touch. Contents of the packaging are the metal bracket, the plastic bezel, and four mounting screws.There are two methods of...

RJ12 UTP Cable - 10MA cable to connect the BMV shunt to the BMV head unit. An RJ12 cable ships standard with a BMV battery monitor, but if this cable is too long or too short it can be replaced by one of these cables, lengths available from 0.3 up to 30...

Mains Cord NEMA 5-15P 120VAC for Smart IP43 SKYLLA-S Phoenix - 2M Power CordThis plug is for 120V systems. One end plugs into the Phoenix Smart IP43 charger. The cord is 2M long and the male plug end is a NEMA 5-15P plug.Please contact your dealer for...

VE.Direct Cable - 1.8MThe Victron VE.Direct Cable is used to link Victron Energy devices that are VE.Direct equipped. The connection between the devices is essential for the communication of information. This particular cable is 1.8 meters in length and...

VE.Direct Cable - 3M The Victron VE.Direct Cable is used to link Victron Energy devices that are VE.Direct equipped. The connection between the devices is essential for the communication of information. This particular cable is 3 meters in length and has...

RJ12 UTP Cable - 0.3MA cable to connect the BMV shunt to the BMV head unit. An RJ12 cable ships standard with a BMV battery monitor, but if this cable is too long or too short it can be replaced by one of these cables. The length of this particular cable...

GX Touch 50 Protection CoverThe GX Touch 50 protection cover prevents damage from UV light during prolonged exposure to the sun.Specification:Model (inch): 5"Please contact your dealer for any returns, repairs or support issues related to this product...

GX Touch 70 Protection CoverThe GX Touch 70 protection cover prevents damage from UV light during prolonged exposure to the sun.Specification:Model (inch): 7"Please contact your dealer for any returns, repairs or support issues related to this product...

veKonvert NMEA 2000 GatewayveKonvert brings NMEA 2000 connectivity to Victrons popular SmartShunt battery monitoring system. Now a navigation multi-function display becomes a sophisticated battery and energy management system.FeaturesveKonvert is a...

Interface MK3-USB-C - VE.Bus to USB-C AdapterThe MK3-USB-C allows the following products to connect to a computer for configuration and firmware updates: Multi MultiGrid MultiPlus MultiPlus-II Quattro VE.Bus BMS V2 Inverter/Charger settings in...

Wall Mount for Blue Smart IP65 Charger - 12/25 24/13This Victron wall mount will be especially useful if users like to keep the smart charger handy - perhaps above the workshop bench. Now users can use the charger without even moving it!Features:Wall...

Carry Case for IP65 Charger 12/25 24/13 - Fits Charger AccessoriesSmart and professional, this new snap-close carry case provides protective stowage and easy transport for Victrons Blue Smart IP65 charger and its accessories.Compartments accommodate...

VE.Direct CableThe VE.Direct cable is available in different lengths.Features:Length: 5MPlease contact your dealer for any returns, repairs or support issues related to this product. The Victron Energy VE.Direct Cable Part ASS030530250 is a reliable and...

RJ12 UTP Cable - 0.3MA cable to connect the BMV shunt to the BMV head unit. An RJ12 cable ships standard with a BMV battery monitor, but if this cable is too long or too short, it can be replaced by one of these cables, lengths available from 0.3 up to...

VE-Can to CAN-bus BMS Type B Cable - 1.8M (5.9)Use this cable to connect a CAN bus-enabled battery, not from Victron, to a Victron system. There are two types, A and B. See the manual for details on which cable to use for which brand of batteries.Please...

2M Extension Cable - 25AVictrons 2-meter extension cable is an accessory for the Blue Smart IP65 Charger with a DC connector.Specifications: Length: 2M 25A The Victron Energy BPC900250014 2-meter extension cable provides a reliable solution for...

GX-IO Extender 150The GX IO-Extender 150 enhances the input and output (I/O) capabilities of a GX device, enabling seamless integration with additional sensors, controls, and external devices. It connects via USB, which also serves as its power source,...

Pre-Charge CableThe Pre-charge Cable allows internal capacitors of an inverter, inverter/charger, or MPPT to be pre-charged via the DC terminals before connecting the battery. This method ensures that connecting the battery will not result in arcing at...

Ve.Direct Cable - 0.9MVictron Energy VE Direct to USB interface cable. For use with BMV700 and BMV702 Energy meters, most MPPT solar charge controllers, and the Color Control GX. Available in a variety of lengths, this cable connects the Color GX to its...

Dock Edge Standard "D" PVC Profile 16ft Roll - WhiteThis versatile and strong profile without a lip can be mounted vertically or horizontally anywhere on the dock face. Great for pilings too. Made of Marine Grade PVC with UV Inhibitors and Fungicide...

Simrad Power Cable f/NSE NSS & StructureScan 3D, GO7, GO9, GO124 pin conn. to 4 bare wires for power in - power control bus and external alarm - 6.5 ft (2 m). The Simrad Power Cable (Part 000-00128-001) is designed for seamless power connection to...

OP50 Wired Remote Control - Portrait MountPerfectly designed for mounting in a helm chair arm, between monitors, or in other locations suiting a portrait orientation, the Simrad OP50 Remote Controller provides intuitive keypad and rotary-dial command of...

Suncover for RS20 VHFMake sure your RS20 VHF continues to work like new by protecting it with the Simrad Suncover. This sturdily made cover fits your system perfectly. It protects your unit from overexposure to sun glare during long boat trips. The cover...

ST10 SimNet Programming Tool KitUse the ST10 SimNet Programming Toolkit by Simrad to load software into SimNet units through the network. It uses a USB cable to connect SimNet units to your computer for easy updates. Try one with your system today!USB...

Pole Mount Kit for HS75Specifications: Weight: 0.3kg Dimensions: 16.2 x 16.2 x 0.3cm Class: Instruments Specifically for Simrad's HS75 The Simrad Pole Mount Kit for HS75 is a durable and reliable mounting solution designed specifically for Simrad's...

RhinoFLEX 5' Sewer Hose Extension with Swivel Bayonet LugCamco's RV RhinoFLEX 5-Foot Sewer Hose Extension Kit with Coupler extends the reach of your RhinoFLEX hose. It includes a 5-foot RhinoFLEX hose with a pre-attached swivel lug and bayonet fitting...

SimNet Joiner Yellow w/o Terminator The Simrad SimNet Joiner Yellow (Part 44172260) is a high-quality marine-grade connector designed for seamless integration of your navigation and communication systems. Crafted by Simrad, this joiner facilitates...

Magneto Safety Kill SwitchMarine emergency cut-off Kill Switch attaches to your life vest while operating a boat or personal watercraft. Designed to instantly cut battery power when detached. The magneto (red cap) version functions in applications where...

NSS 4-12 SuncoverProtect your Simrad NSS 4-12 from the elements with this suncover. The Simrad NSS 4-12 Suncover is designed to shield your marine navigation system from harsh weather conditions and UV exposure. Crafted specifically for the NSS 4-12...

Dash Mounting Kit for Cruise 9Cruise 9 Dash Mounting Kit The Simrad Dash Mounting Kit for Cruise 9 offers a secure and professional installation solution for your marine electronics. Designed specifically for the Cruise 9 series, this mounting kit...

Simnet Protection Plug The Simrad SimNet Protection Plug is designed to safeguard your marine electronics connections from dust, moisture, and debris, ensuring reliable performance in demanding environments. Crafted by Simrad, this durable plug offers a...

Simnet 7 Prong Multi-Joiner The Simrad SimNet 7 Prong Multi-Joiner (Part Number 24006298) is designed to facilitate reliable and secure connections within your marine electronic systems. Crafted by Simrad, this multi-joiner ensures seamless integration...

NSS 4-10 SuncoverProtect your Simrad NSS 4-10 from the elements with this suncover. The Simrad NSS 4-10 Suncover is designed to provide durable, weather-resistant protection for your marine navigation system. Crafted specifically for the NSS 4-10 model,...

Suncover for Cruise 9Protective suncover for Cruise 9" displays. The Simrad Suncover for Cruise 9-inch displays provides reliable protection against sun, dust, and environmental elements, ensuring optimal visibility and durability for marine navigation...

Suncover for Cruise 7Protective suncover for Cruise 7" displays. The Simrad Suncover for Cruise 7-inch displays provides effective protection against sunlight glare and environmental elements, ensuring optimal visibility in outdoor conditions. Crafted...

20M Power Ethernet Cable for HALO 2000 3000 SeriesSimrad's power and ethernet 20-meter cable specifically for the HALO 2000 and 3000 series. The Simrad 20-meter power and Ethernet cable (Part Number: 000-15768-001) is designed specifically for the...